Renogy

250W N-Type Bifacial Solar Panel

250 W panel with an MC4 plug. Expect about 175 W at midday in clear sun.

Where to buyPrices checked Oct 28, 2026

Renogy store

Ships from the maker

$265Buy

Amazon

This panel's Amazon page; price shown on Amazon

Check price

We may earn a commission if you buy through these links. It never changes a verdict.

The four numbers on the label

Every panel has a sticker on the back with these. The station cares about the first two most.

VocBrand page

22.4 V

Open-circuit voltage

The highest voltage the panel makes, with nothing plugged in. This must stay under the station's limit, including on cold mornings.

IscBrand page

13.5 A

Short-circuit current

The most current it can push. Stations cap current; over the cap you lose watts, or on some brands it is not allowed.

VmpBrand page

19.5 V

Voltage at max power

The working voltage while charging. Must be above the station's minimum or charging will not start.

ImpBrand page

12.8 A

Current at max power

The working current while charging. Vmp times Imp is roughly the rated watts.

Open-circuit voltage by morning temperatureone panel, -0.30%/°C, typical value, not published for this panel

25.6 V-10F

24.8 V10F

24.0 V32F

23.4 V50F

22.4 V77F

Why it matters: a station's input limit is a hard number. Two of these panels in series on a 10F morning make 49.7 V. That is fine for a 60 V input and not for a 27 V one.

Which stations it works with

One panel, 20F morning. 80 take it cleanly. Tap a row for the wiring and cables.

EcoFlow DELTA 3 PlusAbout 250 W into the XT60i. Use an MC4 to XT60i solar cable.

Works

EcoFlow DELTA Pro 3About 250 W into the XT60i (Low-PV). Use an MC4 to XT60i solar cable.

Works

BLUETTI AC200LAbout 250 W into the DC input (via DC input cable + solar charging cable). Use the solar charging cable that came with the station (MC4 on the panel side).

Works

Anker SOLIX C1000 Gen 2The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

EcoFlow DELTA 3The manual or page does not give a current limit for this input, so current was not checked.

Works

EcoFlow DELTA 2 MaxAbout 250 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

EcoFlow DELTA ProAbout 250 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

BLUETTI Pioneer MD (AC180T)The manual or page does not give a current limit for this input, so current was not checked.

Works

Show all 109 stationsShow fewer

BLUETTI Pioneer 150 (AC240)About 250 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

BLUETTI Apex 300About 250 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

BLUETTI AC200MAXAbout 250 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

BLUETTI AC200P LAbout 250 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

BLUETTI Elite 100 V2About 250 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

BLUETTI Elite 200 V2About 250 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

BLUETTI Elite 300About 250 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

BLUETTI Elite 400About 250 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

BLUETTI Premium 100 V2About 250 W into the DC input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

BLUETTI Premium 200 V2About 250 W into the PV input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

Anker SOLIX C2000 Gen 2The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Anker SOLIX F2600The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Anker SOLIX F3000The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Anker SOLIX F3800 PlusThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Goal Zero Yeti 1500The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Goal Zero Yeti PRO 4000The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Goal Zero Yeti 1000XThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Goal Zero Yeti 1500XThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Goal Zero Yeti 3000XThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Goal Zero Yeti 6000XThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Anker SOLIX F1500The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Jackery Explorer 2000 PlusThe panels can push 12.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI EP500ProThe panels can push 12.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts.

Works

Jackery Explorer 1500 v2The panels can push 12.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts.

Works

Jackery Explorer 1500 UltraThe panels can push 12.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts.

Works

Jackery Explorer 2000 v2The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Jackery HomePower 3000The panels can push 12.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts.

Works

EcoFlow RIVER 3 PlusAbout 220 W into the XT60i. Use an MC4 to XT60i solar cable.

Works

EcoFlow RIVER 2 MaxAbout 220 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

EcoFlow RIVER 2 Max 500About 220 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

EcoFlow RIVER 2 ProAbout 220 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).

Works

Jackery Explorer 1000 PlusThe panels can push 12.8A but this input takes 11A, so the station caps it. Safe, you just lose some watts.

Works

Jackery Explorer 1000 v2The panels can push 12.8A but this input takes 10.5A, so the station caps it. Safe, you just lose some watts.

Works

Jackery Explorer 5000 PlusThe panels can push 12.8A but this input takes 10.5A, so the station caps it. Safe, you just lose some watts.

Works

EcoFlow RIVER MaxThe panels can push 12.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts.

Works

EcoFlow RIVER Max PlusThe panels can push 12.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts.

Works

EcoFlow RIVER PlusThe panels can push 12.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts.

Works

EcoFlow RIVERThe panels can push 12.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI PS72The manual or page does not give a current limit for this input, so current was not checked.

Works

BLUETTI AC70The panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI AC180The panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.

Works

EcoFlow DELTA miniThe panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.

Works

EcoFlow DELTA 1300 (1260Wh)The panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.

Works

EcoFlow DELTA 1000The panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI AC180PThe panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI AC70PThe panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI Elite 30 V2The panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI Elite 100 miniThe panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI Pioneer NaThe panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.

Works

Anker SOLIX C1000XThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Goal Zero Yeti 300The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Goal Zero Yeti 500The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Goal Zero Yeti 700The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

BLUETTI EB3AThe panels can push 12.8A but this input takes 8.5A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI AC50BThe panels can push 12.8A but this input takes 8.5A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI AC50PThe panels can push 12.8A but this input takes 8.5A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI AC2AThe panels can push 12.8A but this input takes 8.2A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI Pioneer 50 (AC60)The panels can push 12.8A but this input takes 8A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI EB70SThe panels can push 12.8A but this input takes 8A, so the station caps it. Safe, you just lose some watts.

Works

Jackery Explorer 1000The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

EcoFlow RIVER 2The panels can push 12.8A but this input takes 8A, so the station caps it. Safe, you just lose some watts.

Works

EcoFlow RIVER miniThe panels can push 12.8A but this input takes 8A, so the station caps it. Safe, you just lose some watts.

Works

BLUETTI Elite 10 MiniThe panels can push 12.8A but this input takes 8.2A, so the station caps it. Safe, you just lose some watts.

Works

Anker SOLIX C200 DCThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Anker SOLIX C200XThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Anker SOLIX C300The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Anker SOLIX C300 DCThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Anker SOLIX C300XThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Jackery Explorer 300 v2The panels can push 12.8A but this input takes 6A, so the station caps it. Safe, you just lose some watts.

Works

Jackery Explorer 300DThe panels can push 12.8A but this input takes 6A, so the station caps it. Safe, you just lose some watts.

Works

Jackery Explorer 300 PlusThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

Jackery Explorer 100 PlusThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.

Works

EcoFlow DELTA Pro UltraOpen-circuit voltage 22.4V is below the 80V minimum for this input, so it will not start charging.

Don't connect

EcoFlow DELTA Pro Ultra XOpen-circuit voltage 22.4V is below the 80V minimum for this input, so it will not start charging.

Don't connect

BLUETTI AC200POpen-circuit voltage 22.4V is below the 35V minimum for this input, so it will not start charging.

Don't connect

BLUETTI EP500Open-circuit voltage 22.4V is below the 55V minimum for this input, so it will not start charging.

Don't connect

Goal Zero Yeti 500XOpen-circuit voltage 22.4V is above the station's 22V limit. Going over a station's input voltage limit can damage it.

Don't connect

Goal Zero Yeti 200XOpen-circuit voltage 22.4V is above the station's 22V limit. Going over a station's input voltage limit can damage it.

Don't connect

EcoFlow TRAIL 200 DCNot enough confirmed numbers to check yet.

EcoFlow TRAIL 300 DCNot enough confirmed numbers to check yet.

EcoFlow TRAIL Plus 300 DCNot enough confirmed numbers to check yet.

EcoFlow DELTA 3 ClassicNot enough confirmed numbers to check yet.

EcoFlow DELTA 3 MaxNot enough confirmed numbers to check yet.

EcoFlow DELTA 3 Max PlusNot enough confirmed numbers to check yet.

EcoFlow DELTA 3 UltraNot enough confirmed numbers to check yet.

EcoFlow DELTA 3 Ultra PlusNot enough confirmed numbers to check yet.

EcoFlow RIVER ProNot enough confirmed numbers to check yet.

BLUETTI Handsfree 1Not enough confirmed numbers to check yet.

BLUETTI Handsfree 2Not enough confirmed numbers to check yet.

Anker SOLIX C200X DCNot enough confirmed numbers to check yet.

Anker SOLIX C1000X Gen 2Not enough confirmed numbers to check yet.

Anker SOLIX S2000Not enough confirmed numbers to check yet.

Anker SOLIX S5000Not enough confirmed numbers to check yet.

Jackery Explorer 240 v2Not enough confirmed numbers to check yet.

Jackery Explorer 300Not enough confirmed numbers to check yet.

Jackery Explorer 600 v2Not enough confirmed numbers to check yet.

Jackery HomePower 1000 v2Not enough confirmed numbers to check yet.

Jackery HomePower 1000 Plus v2Not enough confirmed numbers to check yet.

Jackery HomePower 2000 Plus v2Not enough confirmed numbers to check yet.

Jackery HomePower 3600 PlusNot enough confirmed numbers to check yet.

Jackery HomePower 3600 Pro MaxNot enough confirmed numbers to check yet.

Quick answers

Which power stations work with the Renogy 250W N-Type Bifacial Solar Panel?

Of the 86 power stations we can check, 80 take one Renogy 250W N-Type Bifacial Solar Panel cleanly, even on a 20°F morning (for example the EcoFlow RIVER 3 Plus, EcoFlow DELTA 3 Plus, EcoFlow DELTA Pro 3).

What is the open-circuit voltage of the Renogy 250W N-Type Bifacial Solar Panel?

22.4 V on the label (standard test conditions). It rises in the cold: about 24.5 V at 20°F and 25.2 V at 0°F, so check it against your station's limit on your coldest morning.

Can I wire two Renogy 250W N-Type Bifacial Solar Panel panels in series?

In series the voltages add: two make about 44.7 V open-circuit (48.9 V at 20°F). In parallel the currents add: about 27 A. Your station must accept whichever you choose.

How much does the Renogy 250W N-Type Bifacial Solar Panel weigh?

27.3 lb, a rigid framed panel.

Sources

From the brand's pageLabel values from Renogy's product page. We will update once we have the manual. Price from the brand store on Oct 28, 2026.renogy.com