We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Renogy 250W N-Type Bifacial Solar Panel work with the BLUETTI Pioneer 150 (AC240)?

Yes. One Renogy 250W N-Type Bifacial Solar Panel works with the BLUETTI Pioneer 150 (AC240): about 24.5 V on a 20°F morning against the station's 60 V limit, and about 250 W in full sun. Two panels: works (2 panels in series on Solar input), about 500 W.

Verdict

Works

1 x 250W N-Type Bifacial Solar Panel into the Pioneer 150 (AC240) (1 panel on Solar input) stays inside 11 to 60 V and under 21 A, even at 20F.

1 x 250W N-Type Bifacial Solar Panel1 panel on Solar input
Pioneer 150 (AC240)Solar input
Expected
250W
Voltage at 20F
24.5V
limit 60 V
Current
12.8A
cap 21 A
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
Renogy 250W N-Type Bifacial Solar Panel

250 W, open-circuit 22.4 V, short-circuit 13.5 A, working 19.5 V / 12.8 A. Brand page Panel details

BLUETTI Pioneer 150 (AC240)

Solar input Solar input: 11 to 60 V, 1200 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in series on Solar input
Best option
Solar input48.912.8500Works
2 panels in parallel on Solar input
The panels can push 25.6A but this input takes 21A, so the station caps it. Safe, you just lose some watts.
Solar input24.525.6410Works

Quick answers

Will the Renogy 250W N-Type Bifacial Solar Panel work with the BLUETTI Pioneer 150 (AC240)?

Yes. One Renogy 250W N-Type Bifacial Solar Panel works with the BLUETTI Pioneer 150 (AC240): about 24.5 V on a 20°F morning against the station's 60 V limit, and about 250 W in full sun. Two panels: works (2 panels in series on Solar input), about 500 W.

Can I connect two 250W N-Type Bifacial Solar Panel panels to the Pioneer 150 (AC240)?

Yes, 2 panels in series on Solar input. That gives about 500 W.

What cable do I need to connect the 250W N-Type Bifacial Solar Panel to the Pioneer 150 (AC240)?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One 250W N-Type Bifacial Solar Panel goes from 22.4 V on its label to about 24.5 V at 20°F and 25.2 V at 0°F. The Pioneer 150 (AC240) accepts up to 60 V on the Solar input.

Where to buy

$265 at the Renogy store, Oct 28, 2026
BuyAmazon
Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the Pioneer 150 (AC240)

→EcoFlow 400W Portable Solar Panel, about 800 W with two
→BLUETTI PV350D, about 580 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 438 W with two
→Jackery SolarSaga 200 (JS-200E), about 400 W with two
→Jackery SolarSaga 200 (JS-200D), about 400 W with two

All 33 panels checked against the Pioneer 150 (AC240)

Rules we applied
  • BLUETTI Pioneer 150 (AC240): solar input 11 to 60 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 22.4 V becomes 24.5 V.
  • Current over the 21 A cap is safe: the station takes 21 A and you get fewer watts. We count only the capped watts.
  • Max 1,200 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
Checked Oct 28, 2026