We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Jackery SolarSaga 200 (JS-200D) work with the BLUETTI Pioneer 150 (AC240)?

Yes. One Jackery SolarSaga 200 (JS-200D) works with the BLUETTI Pioneer 150 (AC240): about 26.9 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 400 W.

Verdict

Works

1 x SolarSaga 200 (JS-200D) into the Pioneer 150 (AC240) (1 panel on Solar input) stays inside 11 to 60 V and under 21 A, even at 20F.

1 x SolarSaga 200 (JS-200D)1 panel on Solar input
Pioneer 150 (AC240)Solar input
Expected
200W
Voltage at 20F
26.9V
limit 60 V
Current
10A
cap 21 A
Cables to buy
  • Check the station's manual for the right solar cable.
Jackery SolarSaga 200 (JS-200D)

200 W, open-circuit 24.8 V, short-circuit 11.2 A, working 20 V / 10 A. Manual Panel details

BLUETTI Pioneer 150 (AC240)

Solar input Solar input: 11 to 60 V, 1200 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
Best option
Solar input26.920400Works
2 panels in series on Solar input
Solar input53.810400Works

Quick answers

Will the Jackery SolarSaga 200 (JS-200D) work with the BLUETTI Pioneer 150 (AC240)?

Yes. One Jackery SolarSaga 200 (JS-200D) works with the BLUETTI Pioneer 150 (AC240): about 26.9 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 400 W.

Can I connect two SolarSaga 200 (JS-200D) panels to the Pioneer 150 (AC240)?

Yes, 2 panels in parallel on Solar input. That gives about 400 W.

What cable do I need to connect the SolarSaga 200 (JS-200D) to the Pioneer 150 (AC240)?

Check the station's manual for the right solar cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One SolarSaga 200 (JS-200D) goes from 24.8 V on its label to about 26.9 V at 20°F and 27.6 V at 0°F. The Pioneer 150 (AC240) accepts up to 60 V on the Solar input.

Where to buy

Price not checked yet
Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the Pioneer 150 (AC240)

→EcoFlow 400W Portable Solar Panel, about 800 W with two
→BLUETTI PV350D, about 580 W with two
→Renogy 250W N-Type Bifacial Solar Panel, about 500 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 438 W with two
→Jackery SolarSaga 200 (JS-200E), about 400 W with two

All 33 panels checked against the Pioneer 150 (AC240)

Rules we applied
  • BLUETTI Pioneer 150 (AC240): solar input 11 to 60 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.27% per °C below 77F (25°C), this panel's own figure. At 20F one panel's 24.8 V becomes 26.9 V.
  • Current over the 21 A cap is safe: the station takes 21 A and you get fewer watts. We count only the capped watts.
  • Max 1,200 W on this input.
Assumptions
  • Cold-morning voltage uses this panel's own coefficient from its manual, 0.27% per °C.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
Checked Oct 28, 2026