We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Renogy 250W N-Type Bifacial Solar Panel work with the BLUETTI AC180P?

Yes. One Renogy 250W N-Type Bifacial Solar Panel works with the BLUETTI AC180P: about 24.5 V on a 20°F morning against the station's 60 V limit, and about 195 W in full sun. Two panels: works (2 panels in series on Solar input), about 390 W.

Verdict

Works

1 x 250W N-Type Bifacial Solar Panel into the AC180P (1 panel on Solar input) stays inside 12 to 60 V, even at 20F. The station caps the current at 10 A.

1 x 250W N-Type Bifacial Solar Panel1 panel on Solar input
AC180PSolar input
Expected
195W
Voltage at 20F
24.5V
limit 60 V
Current
12.8A
cap 10 A
  • The panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
Renogy 250W N-Type Bifacial Solar Panel

250 W, open-circuit 22.4 V, short-circuit 13.5 A, working 19.5 V / 12.8 A. Brand page Panel details

BLUETTI AC180P

Solar input Solar input: 12 to 60 V, 500 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in series on Solar input
The panels can push 12.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Solar input48.912.8390Works
2 panels in parallel on Solar input
The panels can push 25.6A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Solar input24.525.6195Works

Quick answers

Will the Renogy 250W N-Type Bifacial Solar Panel work with the BLUETTI AC180P?

Yes. One Renogy 250W N-Type Bifacial Solar Panel works with the BLUETTI AC180P: about 24.5 V on a 20°F morning against the station's 60 V limit, and about 195 W in full sun. Two panels: works (2 panels in series on Solar input), about 390 W.

Can I connect two 250W N-Type Bifacial Solar Panel panels to the AC180P?

Yes, 2 panels in series on Solar input. That gives about 390 W.

What cable do I need to connect the 250W N-Type Bifacial Solar Panel to the AC180P?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One 250W N-Type Bifacial Solar Panel goes from 22.4 V on its label to about 24.5 V at 20°F and 25.2 V at 0°F. The AC180P accepts up to 60 V on the Solar input.

Where to buy

$265 at the Renogy store, Oct 28, 2026
BuyAmazon
Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the AC180P

→EcoFlow 400W Portable Solar Panel, about 410 W with two
→Jackery SolarSaga 200 (JS-200D), about 400 W with two
→BLUETTI SP200L Solar Panel, about 400 W with two
→Renogy E.Flex 200W Portable Solar Panel, about 400 W with two
→Renogy 200W Flexible Solar Panel, about 400 W with two

All 33 panels checked against the AC180P

Rules we applied
  • BLUETTI AC180P: solar input 12 to 60 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 22.4 V becomes 24.5 V.
  • Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
  • Max 500 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pageAC180P spec page, solar input
Checked Oct 28, 2026