Will the Renogy 250W N-Type Bifacial Solar Panel work with the Goal Zero Yeti 1500X?
Yes. One Renogy 250W N-Type Bifacial Solar Panel works with the Goal Zero Yeti 1500X: about 24.5 V on a 20°F morning against the station's 50 V limit, and about 250 W in full sun. Two panels: works (2 panels in parallel on High Power Port), about 500 W.
Works
1 x 250W N-Type Bifacial Solar Panel into the Yeti 1500X (1 panel on High Power Port) stays inside 14 to 50 V and under 50 A, even at 20F.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- Goal Zero gives solar charging as 600 W actual input at most, across its ports.
- Needs an MC4 to HPP (Anderson Powerpole) adapter cable.
250 W, open-circuit 22.4 V, short-circuit 13.5 A, working 19.5 V / 12.8 A. Brand page Panel details
Goal Zero Yeti 1500XSolar input High Power Port: 14 to 50 V; 8mm: 14 to 50 V, 600 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on High Power Port The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High Power Port | 24.5 | 25.6 | 500 | Works |
| 2 panels in series on High Power Port The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High Power Port | 48.9 | 12.8 | 500 | Works |
| 1 panel on High Power Port + 1 panel on 8mm The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High Power Port + 8mm | 24.5 | 12.8 | 400 | Works |
| 2 panels in parallel on 8mm The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | 8mm | 24.5 | 25.6 | 150 | Works |
| 2 panels in series on 8mm The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | 8mm | 48.9 | 12.8 | 150 | Works |
Quick answers
Will the Renogy 250W N-Type Bifacial Solar Panel work with the Goal Zero Yeti 1500X?
Yes. One Renogy 250W N-Type Bifacial Solar Panel works with the Goal Zero Yeti 1500X: about 24.5 V on a 20°F morning against the station's 50 V limit, and about 250 W in full sun. Two panels: works (2 panels in parallel on High Power Port), about 500 W.
Can I connect two 250W N-Type Bifacial Solar Panel panels to the Yeti 1500X?
Yes, 2 panels in parallel on High Power Port. That gives about 500 W.
What cable do I need to connect the 250W N-Type Bifacial Solar Panel to the Yeti 1500X?
Needs an MC4 to HPP (Anderson Powerpole) adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One 250W N-Type Bifacial Solar Panel goes from 22.4 V on its label to about 24.5 V at 20°F and 25.2 V at 0°F. The Yeti 1500X accepts up to 50 V on the High Power Port.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Yeti 1500X
- Goal Zero Yeti 1500X: solar input 14 to 50 V on the Solar in 1 (High Power Port). Goal Zero does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 22.4 V becomes 24.5 V.
- Current over the 50 A cap is safe: the station takes 50 A and you get fewer watts. We count only the capped watts.
- Max 600 W on this input, 600 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.