BLUETTI
AC200L
2,048 Wh battery, 2,400 W output. Whole-room backup: a fridge, LED lights and a TV together for about 12 hours.
Battery
2,048 Wh
fridge about 29 hours
Output
2,400 W
3,600 W surge
Solar in
1,200 W
full in about 2.5 hours
Weight
62.4 lb
wheels or two people
Where to buyPrices checked Oct 27, 2026
BLUETTI store
Out of stock at the BLUETTI store when we checked
Amazon
This model's Amazon page; price shown on Amazon
We may earn a commission if you buy through these links. It never changes a verdict.
What can it run, and for how long?
Tap what you would plug in. Hours assume a full battery and 15% lost to conversion.
Fridge + LED lights + Phone
22 hours
on a full charge, drawing 80 WBattery over time80 W draw
Full22 hours
Together these draw 80 W. This station puts out 2400 W. It will shut off. Remove the biggest item or run them one at a time.
Specs in plain English
Tap any underlined term for a one-sentence explanation.
Wh
2,048 WhFrom the manual
Enough for a 60 W fridge for about 29 hours, or a CPAP for about 44 hours.Wh Watt-hours. Battery size. How much energy is stored. 1,000 Wh runs a 100W device for about 8.5 hours after losses.
W
2,400 WFrom the manual
Microwave, kettle, most kitchen gear.W Watts. Power right now. The station has a maximum it can put out; each appliance has a draw.
Surge
3,600 WFrom the manual
Short bursts for motors starting, like a fridge compressor or a pump.Surge A short burst of extra output the station can deliver for a second or two, for motors starting.
Voc
12 to 145 VFrom the manual
Your panels, wired up, must stay inside this range even on a cold morning. The checker does the math.Voc Open-circuit voltage. The highest voltage a panel makes, with nothing connected. Rises in cold.
Imp
15 AFrom the manual
Over this, the station simply caps what it takes. You lose watts, nothing breaks.Imp Current at maximum power. The working current when the panel is actually charging.
MPPT
1,200 WFrom the manual
From empty to full in about 2.5 hours of good sun at 70% of rating.MPPT Maximum power point tracker. The charge controller inside the station that finds the best voltage to pull from the panels.
Solar portplug
DC input (via DC input cable + solar charging cable)From the manual
The plug on the station. Panels with a different plug need an adapter cable; we list it in the checker.LiFePO4
LiFePO4From the manual
Long-life chemistry, suited to daily solar use. Check the manual for the exact cycle rating.LiFePO4 Lithium iron phosphate. The battery chemistry in most current stations. Rated for thousands of full cycles; check the manual for the exact number.
Weightlb
62.4 lbFrom the manual
Wheels or two people. Not a grab-and-go unit.Solar panels that work with it
Checked against the 12 to 145 V input range and the 15 A current cap, on a 20F morning. Change panels, count and temperature in the full checker.
Jackery
SolarSaga 200 (JS-200E)
1 panelWorks
2 panels, in seriesWorks
Jackery
SolarSaga 200 (JS-200D)
1 panelWorks
2 panels, in seriesWorks
EcoFlow
400W Portable Solar Panel
1 panelWorks
2 panels, in seriesWorks
EcoFlow
NextGen 220W Bifacial Portable Solar Panel
1 panelWorks
2 panels, in seriesWorks
BLUETTI
PV200D
1 panelWorks
2 panels, in parallelWorks
BLUETTI
PV350D
1 panelWorks
2 panels, in parallelWorks
Anker SOLIX
PS100 Bifacial
1 panelWorks
2 panels, in parallelWorks
Anker SOLIX
PS200 Bifacial
1 panelWorks
2 panels, in parallelWorks
Watch out for
Things in the manual that catch new owners.
01BLUETTI's manual says to wire the panels in series. With a 145V limit, the AC200L takes far longer strings than the 60V stations.
02Use at least 100W of panels.
Having a problem?
Short fixes from the manuals.
Sources
From the manualBLUETTI AC200L user manual
Also checked:support.bluettipower.com
Also checked:bluettipower.com
Shop listing, not yet confirmedPrice, from the BLUETTI store on Oct 27, 2026 (checked every morning)
Spotted an error? Email [email protected] with the manual page number.