station cut-out on dark surface
Last checked Oct 27, 2026Jackery
Explorer 300 Plus
288 Wh battery, 300 W output. Small: CPAP, laptops, lights and phones. A 40 W CPAP runs about 6 hours.
Battery
288 Wh
fridge about 4 hours
Output
300 W
600 W surge
Solar in
100 W
full in about 4 hours
Weight
8.3 lb
one hand
Where to buy
Jackery store
Price not checked yet
Amazon
This model's Amazon page; price shown on Amazon
We may earn a commission if you buy through these links. It never changes a verdict.
What can it run, and for how long?
Tap what you would plug in. Hours assume a full battery and 15% lost to conversion.
Fridge + LED lights + Phone
3 hours
on a full charge, drawing 80 WBattery over time80 W draw
Full3 hours
Together these draw 80 W. This station puts out 300 W. It will shut off. Remove the biggest item or run them one at a time.
Specs in plain English
Tap any underlined term for a one-sentence explanation.
Wh
288 WhFrom the manual
Enough for a 60 W fridge for about 4 hours, or a CPAP for about 6 hours.Wh Watt-hours. Battery size. How much energy is stored. 1,000 Wh runs a 100W device for about 8.5 hours after losses.
W
300 WFrom the manual
CPAP, laptops, lights, phones.W Watts. Power right now. The station has a maximum it can put out; each appliance has a draw.
Surge
600 WFrom the manual
Short bursts for motors starting, like a fridge compressor or a pump.Surge A short burst of extra output the station can deliver for a second or two, for motors starting.
Voc
12 to 27 VFrom the manual
The manual does not say whether this is open-circuit or working voltage, so the checker uses the stricter reading. Your panels, wired up, must stay inside it even on a cold morning.Voc Open-circuit voltage. The highest voltage a panel makes, with nothing connected. Rises in cold.
Imp
5 AFrom the manual
Over this, the station simply caps what it takes. You lose watts, nothing breaks.Imp Current at maximum power. The working current when the panel is actually charging.
MPPT
100 WFrom the manual
From empty to full in about 4 hours of good sun at 70% of rating.MPPT Maximum power point tracker. The charge controller inside the station that finds the best voltage to pull from the panels.
Solar portplug
USB-CFrom the manual
The plug on the station. Panels with a different plug need an adapter cable; we list it in the checker.Battery chemistrychemistry
Not confirmed yet
Weightlb
8.3 lbFrom the manual
One-hand carry.Solar panels that work with it
Checked against the 12 to 27 V input range and the 5 A current cap, on a 20F morning. Change panels, count and temperature in the full checker.
Jackery
SolarSaga 200 (JS-200E)
1 panelWorks
2 panels, in parallelWorks
Jackery
SolarSaga 200 (JS-200D)
1 panelWorks
2 panels, in parallelWorks
EcoFlow
400W Portable Solar Panel
1 panelDon't connect
2 panels, in parallelDon't connect
EcoFlow
NextGen 220W Bifacial Portable Solar Panel
1 panelWorks
2 panels, in parallelWorks
BLUETTI
PV200D
1 panelWorks
2 panels, in parallelWorks
BLUETTI
PV350D
1 panelDon't connect
2 panels, in parallelDon't connect
Anker SOLIX
PS100 Bifacial
1 panelWorks, with a catch
2 panels, in parallelWorks, with a catch
Anker SOLIX
PS200 Bifacial
1 panelDon't connect
2 panels, in parallelDon't connect
Watch out for
Things in the manual that catch new owners.
01Solar charging goes in through the USB-C port, not a DC8020 port. Jackery includes a DC7909-to-USB-C adaptor for this.
Having a problem?
Short fixes from the manuals.
Sources
From the manualJackery Explorer 300 Plus user manual
Price not checked yet.
Spotted an error? Email [email protected] with the manual page number.