Will the BLUETTI PV100 FX Flexible Solar Panel work with the Goal Zero Yeti 1500X?
Yes. One BLUETTI PV100 FX Flexible Solar Panel works with the Goal Zero Yeti 1500X: about 45.3 V on a 20°F morning against the station's 50 V limit, and about 100 W in full sun. Two panels: works (1 panel on High Power Port + 1 panel on 8mm), about 200 W.
Works
1 x PV100 FX Flexible Solar Panel into the Yeti 1500X (1 panel on High Power Port) stays inside 14 to 50 V and under 50 A, even at 20F.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- Goal Zero gives solar charging as 600 W actual input at most, across its ports.
- 41.4 V open circuit is high for a 100 W panel: two in series reach 82.8 V, more than most stations take.
- The BLUETTI US store sells it only in sets of 2 or more.
- Needs an MC4 to HPP (Anderson Powerpole) adapter cable.
100 W, open-circuit 41.4 V, short-circuit 3.1 A. Brand page Panel details
Goal Zero Yeti 1500XSolar input High Power Port: 14 to 50 V; 8mm: 14 to 50 V, 600 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on High Power Port + 1 panel on 8mm The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High Power Port + 8mm | 45.3 | 3.1 | 200 | Works |
| 2 panels in parallel on High Power Port The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High Power Port | 45.3 | 6.1 | 200 | Works |
| 2 panels in parallel on 8mm The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | 8mm | 45.3 | 6.1 | 150 | Works |
| 2 panels in series on High Power Port Open-circuit voltage 82.8V is above the station's 50V limit. Going over a station's input voltage limit can damage it. | High Power Port | 90.7 | 3.1 | 0 | Don't connect |
| 2 panels in series on 8mm Open-circuit voltage 82.8V is above the station's 50V limit. Going over a station's input voltage limit can damage it. | 8mm | 90.7 | 3.1 | 0 | Don't connect |
Quick answers
Will the BLUETTI PV100 FX Flexible Solar Panel work with the Goal Zero Yeti 1500X?
Yes. One BLUETTI PV100 FX Flexible Solar Panel works with the Goal Zero Yeti 1500X: about 45.3 V on a 20°F morning against the station's 50 V limit, and about 100 W in full sun. Two panels: works (1 panel on High Power Port + 1 panel on 8mm), about 200 W.
Can I connect two PV100 FX Flexible Solar Panel panels to the Yeti 1500X?
Yes, 1 panel on High Power Port + 1 panel on 8mm. That gives about 200 W.
What cable do I need to connect the PV100 FX Flexible Solar Panel to the Yeti 1500X?
Needs an MC4 to HPP (Anderson Powerpole) adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One PV100 FX Flexible Solar Panel goes from 41.4 V on its label to about 45.3 V at 20°F and 46.7 V at 0°F. The Yeti 1500X accepts up to 50 V on the High Power Port.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Yeti 1500X
- Goal Zero Yeti 1500X: solar input 14 to 50 V on the Solar in 1 (High Power Port). Goal Zero does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 41.4 V becomes 45.3 V.
- Current over the 50 A cap is safe: the station takes 50 A and you get fewer watts. We count only the capped watts.
- Max 600 W on this input, 600 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.