Will the BLUETTI PV100 FX Flexible Solar Panel work with the BLUETTI AC70P?
Yes. One BLUETTI PV100 FX Flexible Solar Panel works with the BLUETTI AC70P: about 45.3 V on a 20°F morning against the station's 58 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.
Works
1 x PV100 FX Flexible Solar Panel into the AC70P (1 panel on Solar input) stays inside 12 to 58 V and under 10 A, even at 20F.
- 41.4 V open circuit is high for a 100 W panel: two in series reach 82.8 V, more than most stations take.
- The BLUETTI US store sells it only in sets of 2 or more.
- Use the solar charging cable that came with the station (MC4 on the panel side).
100 W, open-circuit 41.4 V, short-circuit 3.1 A. Brand page Panel details
BLUETTI AC70PSolar input Solar input: 12 to 58 V, 500 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on Solar input Best option | Solar input | 45.3 | 6.1 | 200 | Works |
| 2 panels in series on Solar input Open-circuit voltage 82.8V is above the station's 58V limit. Going over a station's input voltage limit can damage it. | Solar input | 90.7 | 3.1 | 0 | Don't connect |
Quick answers
Will the BLUETTI PV100 FX Flexible Solar Panel work with the BLUETTI AC70P?
Yes. One BLUETTI PV100 FX Flexible Solar Panel works with the BLUETTI AC70P: about 45.3 V on a 20°F morning against the station's 58 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.
Can I connect two PV100 FX Flexible Solar Panel panels to the AC70P?
Yes, 2 panels in parallel on Solar input. That gives about 200 W.
What cable do I need to connect the PV100 FX Flexible Solar Panel to the AC70P?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One PV100 FX Flexible Solar Panel goes from 41.4 V on its label to about 45.3 V at 20°F and 46.7 V at 0°F. The AC70P accepts up to 58 V on the Solar input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the AC70P
- BLUETTI AC70P: solar input 12 to 58 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 41.4 V becomes 45.3 V.
- Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
- Max 500 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.