We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the BLUETTI SP200L Solar Panel work with the BLUETTI AC70P?

Yes. One BLUETTI SP200L Solar Panel works with the BLUETTI AC70P: about 26.9 V on a 20°F morning against the station's 58 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 400 W.

Verdict

Works

1 x SP200L Solar Panel into the AC70P (1 panel on Solar input) stays inside 12 to 58 V, even at 20F. The station caps the current at 10 A.

1 x SP200L Solar Panel1 panel on Solar input
AC70PSolar input
Expected
200W
Voltage at 20F
26.9V
limit 58 V
Current
10.8A
cap 10 A
  • BLUETTI does not publish the working voltage (Vmp) or current (Imp) for this panel.
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
BLUETTI SP200L Solar Panel

200 W, open-circuit 24.6 V, short-circuit 10.8 A. Brand page Panel details

BLUETTI AC70P

Solar input Solar input: 12 to 58 V, 500 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
Best option
Solar input26.921.6400Works
2 panels in series on Solar input
Solar input53.910.8400Works

Quick answers

Will the BLUETTI SP200L Solar Panel work with the BLUETTI AC70P?

Yes. One BLUETTI SP200L Solar Panel works with the BLUETTI AC70P: about 26.9 V on a 20°F morning against the station's 58 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 400 W.

Can I connect two SP200L Solar Panel panels to the AC70P?

Yes, 2 panels in parallel on Solar input. That gives about 400 W.

What cable do I need to connect the SP200L Solar Panel to the AC70P?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One SP200L Solar Panel goes from 24.6 V on its label to about 26.9 V at 20°F and 27.8 V at 0°F. The AC70P accepts up to 58 V on the Solar input.

Where to buy

$349 at the BLUETTI store, Oct 28, 2026
BuyAmazon
Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the AC70P

→EcoFlow 400W Portable Solar Panel, about 410 W with two
→Jackery SolarSaga 200 (JS-200D), about 400 W with two
→Renogy E.Flex 200W Portable Solar Panel, about 400 W with two
→Renogy 200W Flexible Solar Panel, about 400 W with two
→BLUETTI PV200D, about 396 W with two

All 33 panels checked against the AC70P

Rules we applied
  • BLUETTI AC70P: solar input 12 to 58 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 24.6 V becomes 26.9 V.
  • Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
  • Max 500 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pageAC70P spec page, solar input
From the brand's pageSP200L Solar Panel label values
Checked Oct 28, 2026