We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the BLUETTI PV350D work with the BLUETTI AC70P?

Yes. One BLUETTI PV350D works with the BLUETTI AC70P: about 36.1 V on a 20°F morning against the station's 58 V limit, and about 276 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 276 W.

Verdict

Works

1 x PV350D into the AC70P (1 panel on Solar input) stays inside 12 to 58 V, even at 20F. The station caps the current at 10 A.

1 x PV350D1 panel on Solar input
AC70PSolar input
Expected
276W
Voltage at 20F
36.1V
limit 58 V
Current
12.7A
cap 10 A
  • The panels can push 12.7A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Cables to buy
  • The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.
BLUETTI PV350D

350 W, open-circuit 33 V, short-circuit 13.8 A, working 27.6 V / 12.7 A. Manual Panel details

BLUETTI AC70P

Solar input Solar input: 12 to 58 V, 500 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
The panels can push 25.4A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Solar input36.125.4276Works
2 panels in series on Solar input
Open-circuit voltage 66V is above the station's 58V limit. Going over a station's input voltage limit can damage it.
Solar input72.312.70Don't connect

Quick answers

Will the BLUETTI PV350D work with the BLUETTI AC70P?

Yes. One BLUETTI PV350D works with the BLUETTI AC70P: about 36.1 V on a 20°F morning against the station's 58 V limit, and about 276 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 276 W.

Can I connect two PV350D panels to the AC70P?

Yes, 2 panels in parallel on Solar input. That gives about 276 W.

What cable do I need to connect the PV350D to the AC70P?

The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One PV350D goes from 33 V on its label to about 36.1 V at 20°F and 37.2 V at 0°F. The AC70P accepts up to 58 V on the Solar input.

Where to buy

Price not checked yet
Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the AC70P

→EcoFlow 400W Portable Solar Panel, about 410 W with two
→Jackery SolarSaga 200 (JS-200D), about 400 W with two
→BLUETTI SP200L Solar Panel, about 400 W with two
→Renogy E.Flex 200W Portable Solar Panel, about 400 W with two
→Renogy 200W Flexible Solar Panel, about 400 W with two

All 33 panels checked against the AC70P

Rules we applied
  • BLUETTI AC70P: solar input 12 to 58 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 33 V becomes 36.1 V.
  • Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
  • Max 500 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pageAC70P spec page, solar input
From the manualPV350D label values
Checked Oct 28, 2026