Will the Jackery SolarSaga 100 Air work with the Jackery HomePower 3600 Pro Max?
Yes. One Jackery SolarSaga 100 Air works with the Jackery HomePower 3600 Pro Max: about 32.5 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 200 W.
Works
1 x SolarSaga 100 Air into the HomePower 3600 Pro Max (1 panel on DC8020) stays inside 16 to 60 V and under 12 A, even at 20F.
- Bifacial: Jackery also rates it at 110 W with light on the back (BNPI); the checker uses the front-only figures.
- Needs an MC4 to DC8020 adapter cable.
100 W, open-circuit 29.7 V, short-circuit 4.1 A, working 25.4 V / 4 A. Brand page Panel details
Jackery HomePower 3600 Pro MaxSolar input DC8020: 16 to 60 V; DC8020: 16 to 60 V, 1200 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on DC8020 + 1 panel on DC8020 Best option | DC8020 + DC8020 | 32.5 | 4 | 200 | Works |
| 2 panels in parallel on DC8020 | DC8020 | 32.5 | 7.9 | 200 | Works |
| 2 panels in series on DC8020 On a 20°F (-7°C) morning the open-circuit voltage can reach about 65V, above 60V. | DC8020 | 65 | 4 | 200 | Works, with a catch |
Quick answers
Will the Jackery SolarSaga 100 Air work with the Jackery HomePower 3600 Pro Max?
Yes. One Jackery SolarSaga 100 Air works with the Jackery HomePower 3600 Pro Max: about 32.5 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 200 W.
Can I connect two SolarSaga 100 Air panels to the HomePower 3600 Pro Max?
Yes, 1 panel on DC8020 + 1 panel on DC8020. That gives about 200 W.
What cable do I need to connect the SolarSaga 100 Air to the HomePower 3600 Pro Max?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One SolarSaga 100 Air goes from 29.7 V on its label to about 32.5 V at 20°F and 33.5 V at 0°F. The HomePower 3600 Pro Max accepts up to 60 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the HomePower 3600 Pro Max
- Jackery HomePower 3600 Pro Max: solar input 16 to 60 V on the Solar in 1 (DC8020). Jackery rates this input by working voltage (Vmp), so that is the number we hold to the limit. We still warn when the cold-morning open-circuit voltage goes over it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 29.7 V becomes 32.5 V.
- Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
- Max 600 W on this input, 1,200 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.