Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the Jackery HomePower 3600 Pro Max?
Yes. One EcoFlow NextGen 220W Bifacial Portable Solar Panel works with the Jackery HomePower 3600 Pro Max: about 23.5 V on a 20°F morning against the station's 60 V limit, and about 219 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 438 W.
Works
1 x NextGen 220W Bifacial Portable Solar Panel into the HomePower 3600 Pro Max (1 panel on DC8020) stays inside 16 to 60 V and under 12 A, even at 20F.
- Needs an MC4 to DC8020 adapter cable.
220 W, open-circuit 21.5 V, short-circuit 12.4 A, working 18.4 V / 11.9 A. Brand page Panel details
Jackery HomePower 3600 Pro MaxSolar input DC8020: 16 to 60 V; DC8020: 16 to 60 V, 1200 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on DC8020 + 1 panel on DC8020 Best option | DC8020 + DC8020 | 23.5 | 11.9 | 438 | Works |
| 2 panels in series on DC8020 | DC8020 | 47.1 | 11.9 | 438 | Works |
| 2 panels in parallel on DC8020 The panels can push 23.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts. | DC8020 | 23.5 | 23.8 | 221 | Works |
Quick answers
Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the Jackery HomePower 3600 Pro Max?
Yes. One EcoFlow NextGen 220W Bifacial Portable Solar Panel works with the Jackery HomePower 3600 Pro Max: about 23.5 V on a 20°F morning against the station's 60 V limit, and about 219 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 438 W.
Can I connect two NextGen 220W Bifacial Portable Solar Panel panels to the HomePower 3600 Pro Max?
Yes, 1 panel on DC8020 + 1 panel on DC8020. That gives about 438 W.
What cable do I need to connect the NextGen 220W Bifacial Portable Solar Panel to the HomePower 3600 Pro Max?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One NextGen 220W Bifacial Portable Solar Panel goes from 21.5 V on its label to about 23.5 V at 20°F and 24.3 V at 0°F. The HomePower 3600 Pro Max accepts up to 60 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the HomePower 3600 Pro Max
- Jackery HomePower 3600 Pro Max: solar input 16 to 60 V on the Solar in 1 (DC8020). Jackery rates this input by working voltage (Vmp), so that is the number we hold to the limit. We still warn when the cold-morning open-circuit voltage goes over it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.5 V becomes 23.5 V.
- Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
- Max 600 W on this input, 1,200 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.