We may earn a commission if you buy through these links. It never changes a verdict. How this works
EcoFlow NextGen 220W Bifacial Portable Solar Panel
EcoFlow

NextGen 220W Bifacial Portable Solar Panel

220 W panel with an MC4 plug. Expect about 154 W at midday in clear sun.

Where to buy
EcoFlow store
Price not checked yet

We may earn a commission if you buy through these links. It never changes a verdict.

The four numbers on the label

Every panel has a sticker on the back with these. The station cares about the first two most.

VocBrand page
21.5 V
Open-circuit voltage

The highest voltage the panel makes, with nothing plugged in. This must stay under the station's limit, including on cold mornings.

IscBrand page
12.4 A
Short-circuit current

The most current it can push. Stations cap current; over the cap you lose watts, or on some brands it is not allowed.

VmpBrand page
18.4 V
Voltage at max power

The working voltage while charging. Must be above the station's minimum or charging will not start.

ImpBrand page
11.9 A
Current at max power

The working current while charging. Vmp times Imp is roughly the rated watts.

Open-circuit voltage by morning temperatureone panel, -0.30%/°C, typical value, not published for this panel
24.6 V-10F
23.9 V10F
23.1 V32F
22.5 V50F
21.5 V77F

Why it matters: a station's input limit is a hard number. Two of these panels in series on a 10F morning make 47.8 V. That is fine for a 60 V input and not for a 27 V one.

Which stations it works with

One panel, 20F morning. Tap a row for the full result with wiring and cables.

EcoFlow RIVER 3 PlusAbout 219 W into the XT60i. Use an MC4 to XT60i solar cable.
Works
EcoFlow DELTA 3 PlusAbout 219 W into the XT60i. Use an MC4 to XT60i solar cable.
Works
EcoFlow DELTA Pro 3About 219 W into the XT60i (Low-PV). Use an MC4 to XT60i solar cable.
Works
Jackery Explorer 300 PlusThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Jackery Explorer 1000 v2The panels can push 11.9A but this input takes 10.5A, so the station caps it. Safe, you just lose some watts.
Works
Jackery Explorer 2000 PlusAbout 219 W into the DC8020. Needs an MC4 to DC8020 adapter cable.
Works
BLUETTI AC70The panels can push 11.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI AC180The panels can push 11.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI AC200LAbout 219 W into the DC input (via DC input cable + solar charging cable). Use the solar charging cable that came with the station (MC4 on the panel side).
Works
Anker SOLIX C1000 Gen 2The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
EcoFlow RIVER 2The panels can push 11.9A but this input takes 8A, so the station caps it. Safe, you just lose some watts.
Works
EcoFlow RIVER 2 MaxAbout 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
EcoFlow RIVER 2 Max 500About 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
EcoFlow RIVER 2 ProAbout 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
EcoFlow TRAIL 200 DCNot enough confirmed numbers to check yet.
EcoFlow TRAIL 300 DCNot enough confirmed numbers to check yet.
EcoFlow TRAIL Plus 300 DCNot enough confirmed numbers to check yet.
EcoFlow DELTA 3 ClassicNot enough confirmed numbers to check yet.
EcoFlow DELTA 3The manual or page does not give a current limit for this input, so current was not checked.
Works
EcoFlow DELTA 3 MaxNot enough confirmed numbers to check yet.
EcoFlow DELTA 3 Max PlusNot enough confirmed numbers to check yet.
EcoFlow DELTA 3 UltraNot enough confirmed numbers to check yet.
EcoFlow DELTA 3 Ultra PlusNot enough confirmed numbers to check yet.
EcoFlow DELTA 2 MaxAbout 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
EcoFlow DELTA ProAbout 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
EcoFlow DELTA Pro UltraOpen-circuit voltage 21.5V is below the 80V minimum for this input, so it will not start charging.
Don't connect
EcoFlow DELTA Pro Ultra XOpen-circuit voltage 21.5V is below the 80V minimum for this input, so it will not start charging.
Don't connect
EcoFlow DELTA miniThe panels can push 11.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Works
EcoFlow DELTA 1300 (1260Wh)The panels can push 11.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Works
EcoFlow DELTA 1000The panels can push 11.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Works
EcoFlow RIVER MaxAbout 200 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
EcoFlow RIVER Max PlusAbout 200 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
EcoFlow RIVER miniThe panels can push 11.9A but this input takes 8A, so the station caps it. Safe, you just lose some watts.
Works
EcoFlow RIVER PlusAbout 200 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
EcoFlow RIVER ProNot enough confirmed numbers to check yet.
EcoFlow RIVERAbout 200 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI EB3AThe panels can push 11.9A but this input takes 8.5A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI AC2AThe panels can push 11.9A but this input takes 8.2A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI Pioneer 50 (AC60)The panels can push 11.9A but this input takes 8A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI Pioneer MD (AC180T)The manual or page does not give a current limit for this input, so current was not checked.
Works
BLUETTI Pioneer 150 (AC240)About 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI Apex 300About 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI AC180PThe panels can push 11.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI AC200MAXAbout 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI AC200P LAbout 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI AC200POpen-circuit voltage 21.5V is below the 35V minimum for this input, so it will not start charging.
Don't connect
BLUETTI AC50BThe panels can push 11.9A but this input takes 8.5A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI AC50PThe panels can push 11.9A but this input takes 8.5A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI AC70PThe panels can push 11.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI EB70SThe panels can push 11.9A but this input takes 8A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI EP500Open-circuit voltage 21.5V is below the 55V minimum for this input, so it will not start charging.
Don't connect
BLUETTI EP500ProAbout 219 W into the PV input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI Elite 10 MiniThe panels can push 11.9A but this input takes 8.2A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI Elite 30 V2The panels can push 11.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI Elite 100 V2About 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI Elite 100 miniThe panels can push 11.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI Elite 200 V2About 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI Elite 300About 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI Elite 400About 219 W into the Solar input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI Handsfree 1Not enough confirmed numbers to check yet.
BLUETTI Handsfree 2Not enough confirmed numbers to check yet.
BLUETTI PS72The manual or page does not give a current limit for this input, so current was not checked.
Works
BLUETTI Pioneer NaThe panels can push 11.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
Works
BLUETTI Premium 100 V2About 219 W into the DC input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
BLUETTI Premium 200 V2About 219 W into the PV input. Use the solar charging cable that came with the station (MC4 on the panel side).
Works
Anker SOLIX C200 DCThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX C200X DCNot enough confirmed numbers to check yet.
Anker SOLIX C200XThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX C300The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX C300 DCThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX C300XThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX C1000X Gen 2Not enough confirmed numbers to check yet.
Anker SOLIX C1000XThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX C2000 Gen 2The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX F1500The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX F2600The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX F3000The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX F3800 PlusThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Anker SOLIX S2000Not enough confirmed numbers to check yet.
Anker SOLIX S5000Not enough confirmed numbers to check yet.
Jackery Explorer 100 PlusThe brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Jackery Explorer 240 v2Not enough confirmed numbers to check yet.
Jackery Explorer 300 v2The panels can push 11.9A but this input takes 6A, so the station caps it. Safe, you just lose some watts.
Works
Jackery Explorer 300DThe panels can push 11.9A but this input takes 6A, so the station caps it. Safe, you just lose some watts.
Works
Jackery Explorer 300Not enough confirmed numbers to check yet.
Jackery Explorer 600 v2Not enough confirmed numbers to check yet.
Jackery Explorer 1000The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Jackery Explorer 1000 PlusThe panels can push 11.9A but this input takes 11A, so the station caps it. Safe, you just lose some watts.
Works
Jackery Explorer 1500 v2About 219 W into the DC8020. Needs an MC4 to DC8020 adapter cable.
Works
Jackery Explorer 1500 UltraAbout 219 W into the DC8020. Needs an MC4 to DC8020 adapter cable.
Works
Jackery Explorer 2000 v2The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Works
Jackery Explorer 5000 PlusThe panels can push 11.9A but this input takes 10.5A, so the station caps it. Safe, you just lose some watts.
Works
Jackery HomePower 1000 v2Not enough confirmed numbers to check yet.
Jackery HomePower 1000 Plus v2Not enough confirmed numbers to check yet.
Jackery HomePower 2000 Plus v2Not enough confirmed numbers to check yet.
Jackery HomePower 3000About 219 W into the DC8020. Needs an MC4 to DC8020 adapter cable.
Works
Jackery HomePower 3600 PlusNot enough confirmed numbers to check yet.
Jackery HomePower 3600 Pro MaxNot enough confirmed numbers to check yet.

Sources

From the brand's pageLabel values from EcoFlow's product page. We will update once we have the manual. Price not checked yet.us.ecoflow.com