Will the EcoFlow 100W Flexible Solar Panel work with the Jackery HomePower 3600 Pro Max?
Yes. One EcoFlow 100W Flexible Solar Panel works with the Jackery HomePower 3600 Pro Max: about 22.4 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 200 W.
Works
1 x 100W Flexible Solar Panel into the HomePower 3600 Pro Max (1 panel on DC8020) stays inside 16 to 60 V and under 12 A, even at 20F.
- Needs an MC4 to DC8020 adapter cable.
100 W, open-circuit 20.3 V, short-circuit 6.3 A, working 17.1 V / 5.9 A. Brand page Panel details
Jackery HomePower 3600 Pro MaxSolar input DC8020: 16 to 60 V; DC8020: 16 to 60 V, 1200 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on DC8020 + 1 panel on DC8020 Best option | DC8020 + DC8020 | 22.4 | 5.9 | 200 | Works |
| 2 panels in parallel on DC8020 | DC8020 | 22.4 | 11.8 | 200 | Works |
| 2 panels in series on DC8020 | DC8020 | 44.8 | 5.9 | 200 | Works |
Quick answers
Will the EcoFlow 100W Flexible Solar Panel work with the Jackery HomePower 3600 Pro Max?
Yes. One EcoFlow 100W Flexible Solar Panel works with the Jackery HomePower 3600 Pro Max: about 22.4 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 200 W.
Can I connect two 100W Flexible Solar Panel panels to the HomePower 3600 Pro Max?
Yes, 1 panel on DC8020 + 1 panel on DC8020. That gives about 200 W.
What cable do I need to connect the 100W Flexible Solar Panel to the HomePower 3600 Pro Max?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One 100W Flexible Solar Panel goes from 20.3 V on its label to about 22.4 V at 20°F and 23.2 V at 0°F. The HomePower 3600 Pro Max accepts up to 60 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the HomePower 3600 Pro Max
- Jackery HomePower 3600 Pro Max: solar input 16 to 60 V on the Solar in 1 (DC8020). Jackery rates this input by working voltage (Vmp), so that is the number we hold to the limit. We still warn when the cold-morning open-circuit voltage goes over it.
- Cold raises panel voltage: we add 0.33% per °C below 77F (25°C), this panel's own figure. At 20F one panel's 20.3 V becomes 22.4 V.
- Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
- Max 600 W on this input, 1,200 W across all inputs.
- Cold-morning voltage uses this panel's own coefficient from its manual, 0.33% per °C.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.