Will the EcoFlow 175W Rigid Solar Panel work with the Jackery HomePower 1000 v2?
Yes. One EcoFlow 175W Rigid Solar Panel works with the Jackery HomePower 1000 v2: about 27.9 V on a 20°F morning against the station's 60 V limit, and about 175 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 350 W.
Works
1 x 175W Rigid Solar Panel into the HomePower 1000 v2 (1 panel on DC8020) stays inside 16 to 60 V and under 12 A, even at 20F.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- EcoFlow's spec table labels the 7.85 A figure as a voltage; it is the operating current.
- Needs an MC4 to DC8020 adapter cable.
175 W, open-circuit 25.5 V, short-circuit 8.3 A, working 22.3 V / 7.9 A. Brand page Panel details
Jackery HomePower 1000 v2Solar input DC8020: 16 to 60 V; DC8020: 16 to 60 V, 400 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on DC8020 + 1 panel on DC8020 The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | DC8020 + DC8020 | 27.9 | 7.9 | 350 | Works |
| 2 panels in series on DC8020 The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | DC8020 | 55.8 | 7.9 | 350 | Works |
| 2 panels in parallel on DC8020 The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | DC8020 | 27.9 | 15.7 | 268 | Works |
Quick answers
Will the EcoFlow 175W Rigid Solar Panel work with the Jackery HomePower 1000 v2?
Yes. One EcoFlow 175W Rigid Solar Panel works with the Jackery HomePower 1000 v2: about 27.9 V on a 20°F morning against the station's 60 V limit, and about 175 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 350 W.
Can I connect two 175W Rigid Solar Panel panels to the HomePower 1000 v2?
Yes, 1 panel on DC8020 + 1 panel on DC8020. That gives about 350 W.
What cable do I need to connect the 175W Rigid Solar Panel to the HomePower 1000 v2?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One 175W Rigid Solar Panel goes from 25.5 V on its label to about 27.9 V at 20°F and 28.8 V at 0°F. The HomePower 1000 v2 accepts up to 60 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the HomePower 1000 v2
- Jackery HomePower 1000 v2: solar input 16 to 60 V on the Solar in 1 (DC8020). Jackery does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 25.5 V becomes 27.9 V.
- Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
- Max 200 W on this input, 400 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.