Will the Anker SOLIX PS100 Bifacial work with the Jackery Explorer 300D?
Yes, with a catch. Fine in mild weather (25.9V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 28.4V, above the 28V limit. Cold makes panels push more voltage. Two panels: works, with a catch (2 panels in parallel on DC8020), about 100 W.
Works, with a catch
It charges, but read the note. Best option: 1 panel on DC8020.
- Fine in mild weather (25.9V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 28.4V, above the 28V limit. Cold makes panels push more voltage.
- Jackery's manual: the panel's open-circuit voltage (Voc) must be between 16 and 28V, 100W max.
- Needs an MC4 to DC8020 adapter cable.
100 W, open-circuit 25.9 V, short-circuit 4.9 A, working 21.6 V / 4.6 A. Unconfirmed Panel details
Jackery Explorer 300DSolar input DC8020: 16 to 28 V, 100 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on DC8020 Fine in mild weather (25.9V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 28.4V, above the 28V limit. Cold makes panels push more voltage. | DC8020 | 28.4 | 9.3 | 100 | Works, with a catch |
| 2 panels in series on DC8020 Open-circuit voltage 51.8V is above the station's 28V limit. Going over a station's input voltage limit can damage it. | DC8020 | 56.7 | 4.6 | 0 | Don't connect |
Quick answers
Will the Anker SOLIX PS100 Bifacial work with the Jackery Explorer 300D?
Yes, with a catch. Fine in mild weather (25.9V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 28.4V, above the 28V limit. Cold makes panels push more voltage. Two panels: works, with a catch (2 panels in parallel on DC8020), about 100 W.
Can I connect two PS100 Bifacial panels to the Explorer 300D?
Yes, 2 panels in parallel on DC8020. That gives about 100 W, with one catch: Fine in mild weather (25.9V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 28.4V, above the 28V limit. Cold makes panels push more voltage..
What cable do I need to connect the PS100 Bifacial to the Explorer 300D?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One PS100 Bifacial goes from 25.9 V on its label to about 28.4 V at 20°F and 29.2 V at 0°F. The Explorer 300D accepts up to 28 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Explorer 300D
- Jackery Explorer 300D: solar input 16 to 28 V on the Solar in (DC8020). Jackery sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 25.9 V becomes 28.4 V.
- Current over the 6 A cap is safe: the station takes 6 A and you get fewer watts. We count only the capped watts.
- Max 100 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
- Some numbers for Anker SOLIX PS100 Bifacial come from a shop listing we have not confirmed in the manual yet.