We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Rich Solar MEGA 200 work with the Jackery Explorer 1000?

Yes. One Rich Solar MEGA 200 works with the Jackery Explorer 1000: about 23.9 V on a 20°F morning against the station's 30 V limit, and about 138 W in full sun. Two panels: works (2 panels in parallel on DC input), about 138 W.

Verdict

Works

1 x MEGA 200 into the Explorer 1000 (1 panel on DC input) stays inside 12 to 30 V, even at 20F. The station caps the current at 7.5 A.

1 x MEGA 2001 panel on DC input
Explorer 1000DC input
Expected
138W
Voltage at 20F
23.9V
limit 30 V
Current
10.9A
cap 7.5 A
  • The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
  • The panels can push 10.9A but this input takes 7.5A, so the station caps it. Safe, you just lose some watts.
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
Rich Solar MEGA 200

200 W, open-circuit 21.8 V, short-circuit 11.6 A, working 18.4 V / 10.9 A. Brand page Panel details

Jackery Explorer 1000

Solar input DC input: 12 to 30 V. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on DC input
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
DC input23.921.8138Works
2 panels in series on DC input
Open-circuit voltage 43.6V is above the station's 30V limit. Going over a station's input voltage limit can damage it.
DC input47.710.90Don't connect

Quick answers

Will the Rich Solar MEGA 200 work with the Jackery Explorer 1000?

Yes. One Rich Solar MEGA 200 works with the Jackery Explorer 1000: about 23.9 V on a 20°F morning against the station's 30 V limit, and about 138 W in full sun. Two panels: works (2 panels in parallel on DC input), about 138 W.

Can I connect two MEGA 200 panels to the Explorer 1000?

Yes, 2 panels in parallel on DC input. That gives about 138 W.

What cable do I need to connect the MEGA 200 to the Explorer 1000?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One MEGA 200 goes from 21.8 V on its label to about 23.9 V at 20°F and 24.6 V at 0°F. The Explorer 1000 accepts up to 30 V on the DC input.

Where to buy

$240 at the Rich Solar store, Oct 28, 2026
BuyAmazon
$999 at the Jackery store, Oct 28, 2026
BuyAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the Explorer 1000

→BLUETTI SP200L Solar Panel, about 400 W with two
→EcoFlow 175W Rigid Solar Panel, about 167 W with two
→Anker SOLIX PS100 Bifacial, about 162 W with two
→BLUETTI SP100L Solar Panel, about 154 W with two
→BLUETTI PV200D, about 153 W with two

All 33 panels checked against the Explorer 1000

Rules we applied
  • Jackery Explorer 1000: solar input 12 to 30 V on the Solar in (DC input). Jackery does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.8 V becomes 23.9 V.
  • Current over the 7.5 A cap is safe: the station takes 7.5 A and you get fewer watts. We count only the capped watts.
  • Max watts on this input: not confirmed yet.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pageMEGA 200 label values
Checked Oct 28, 2026