Will the Renogy 100W Lightweight Flexible Solar Panel work with the Jackery Explorer 1000?
Yes. One Renogy 100W Lightweight Flexible Solar Panel works with the Jackery Explorer 1000: about 24.6 V on a 20°F morning against the station's 30 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on DC input), about 142 W.
Works
1 x 100W Lightweight Flexible Solar Panel into the Explorer 1000 (1 panel on DC input) stays inside 12 to 30 V and under 7.5 A, even at 20F.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- Use the solar charging cable that came with the station (MC4 on the panel side).
100 W, open-circuit 22.5 V, short-circuit 5.8 A, working 18.9 V / 5.3 A. Brand page Panel details
Jackery Explorer 1000Solar input DC input: 12 to 30 V. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on DC input The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | DC input | 24.6 | 10.6 | 142 | Works |
| 2 panels in series on DC input Open-circuit voltage 45V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | DC input | 49.3 | 5.3 | 0 | Don't connect |
Quick answers
Will the Renogy 100W Lightweight Flexible Solar Panel work with the Jackery Explorer 1000?
Yes. One Renogy 100W Lightweight Flexible Solar Panel works with the Jackery Explorer 1000: about 24.6 V on a 20°F morning against the station's 30 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on DC input), about 142 W.
Can I connect two 100W Lightweight Flexible Solar Panel panels to the Explorer 1000?
Yes, 2 panels in parallel on DC input. That gives about 142 W.
What cable do I need to connect the 100W Lightweight Flexible Solar Panel to the Explorer 1000?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One 100W Lightweight Flexible Solar Panel goes from 22.5 V on its label to about 24.6 V at 20°F and 25.4 V at 0°F. The Explorer 1000 accepts up to 30 V on the DC input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Explorer 1000
- Jackery Explorer 1000: solar input 12 to 30 V on the Solar in (DC input). Jackery does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 22.5 V becomes 24.6 V.
- Current over the 7.5 A cap is safe: the station takes 7.5 A and you get fewer watts. We count only the capped watts.
- Max watts on this input: not confirmed yet.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.