Will the Jackery SolarSaga 100 Air work with the Jackery Explorer 1000?
Yes, with a catch. Fine in mild weather (29.7V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 32.5V, above the 30V limit. Cold makes panels push more voltage. Two panels: works, with a catch (2 panels in parallel on DC input), about 191 W.
Works, with a catch
It charges, but read the note. Best option: 1 panel on DC input.
- Fine in mild weather (29.7V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 32.5V, above the 30V limit. Cold makes panels push more voltage.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- Bifacial: Jackery also rates it at 110 W with light on the back (BNPI); the checker uses the front-only figures.
- Use the solar charging cable that came with the station (MC4 on the panel side).
100 W, open-circuit 29.7 V, short-circuit 4.1 A, working 25.4 V / 4 A. Brand page Panel details
Jackery Explorer 1000Solar input DC input: 12 to 30 V. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on DC input Fine in mild weather (29.7V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 32.5V, above the 30V limit. Cold makes panels push more voltage. | DC input | 32.5 | 7.9 | 191 | Works, with a catch |
| 2 panels in series on DC input Open-circuit voltage 59.4V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | DC input | 65 | 4 | 0 | Don't connect |
Quick answers
Will the Jackery SolarSaga 100 Air work with the Jackery Explorer 1000?
Yes, with a catch. Fine in mild weather (29.7V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 32.5V, above the 30V limit. Cold makes panels push more voltage. Two panels: works, with a catch (2 panels in parallel on DC input), about 191 W.
Can I connect two SolarSaga 100 Air panels to the Explorer 1000?
Yes, 2 panels in parallel on DC input. That gives about 191 W, with one catch: Fine in mild weather (29.7V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 32.5V, above the 30V limit. Cold makes panels push more voltage..
What cable do I need to connect the SolarSaga 100 Air to the Explorer 1000?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One SolarSaga 100 Air goes from 29.7 V on its label to about 32.5 V at 20°F and 33.5 V at 0°F. The Explorer 1000 accepts up to 30 V on the DC input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Explorer 1000
- Jackery Explorer 1000: solar input 12 to 30 V on the Solar in (DC input). Jackery does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 29.7 V becomes 32.5 V.
- Current over the 7.5 A cap is safe: the station takes 7.5 A and you get fewer watts. We count only the capped watts.
- Max watts on this input: not confirmed yet.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.