Will the EcoFlow NextGen 160W Portable Solar Panel work with the Jackery Explorer 1000 v2?
Yes. One EcoFlow NextGen 160W Portable Solar Panel works with the Jackery Explorer 1000 v2: about 23.3 V on a 20°F morning against the station's 60 V limit, and about 160 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 320 W.
Works
1 x NextGen 160W Portable Solar Panel into the Explorer 1000 v2 (1 panel on DC8020) stays inside 12 to 60 V and under 10.5 A, even at 20F.
- Jackery's manual: each of the two DC8020 ports takes one 100W or 200W panel directly. Two 100W panels on one port need Jackery's solar panel connector.
- Below 16V working voltage each port only takes 8A instead of 10.5A.
- Ships with an XT60i charging cable, so it plugs straight into recent EcoFlow stations.
- Needs an MC4 to DC8020 adapter cable.
160 W, open-circuit 21.3 V, short-circuit 9.1 A, working 18.6 V / 8.6 A. Brand page Panel details
Jackery Explorer 1000 v2Solar input DC8020: 12 to 60 V; DC8020: 12 to 60 V, 400 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on DC8020 + 1 panel on DC8020 Best option | DC8020 + DC8020 | 23.3 | 8.6 | 320 | Works |
| 2 panels in series on DC8020 | DC8020 | 46.6 | 8.6 | 320 | Works |
| 2 panels in parallel on DC8020 The panels can push 17.2A but this input takes 10.5A, so the station caps it. Safe, you just lose some watts. | DC8020 | 23.3 | 17.2 | 195 | Works |
Quick answers
Will the EcoFlow NextGen 160W Portable Solar Panel work with the Jackery Explorer 1000 v2?
Yes. One EcoFlow NextGen 160W Portable Solar Panel works with the Jackery Explorer 1000 v2: about 23.3 V on a 20°F morning against the station's 60 V limit, and about 160 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 320 W.
Can I connect two NextGen 160W Portable Solar Panel panels to the Explorer 1000 v2?
Yes, 1 panel on DC8020 + 1 panel on DC8020. That gives about 320 W.
What cable do I need to connect the NextGen 160W Portable Solar Panel to the Explorer 1000 v2?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One NextGen 160W Portable Solar Panel goes from 21.3 V on its label to about 23.3 V at 20°F and 24 V at 0°F. The Explorer 1000 v2 accepts up to 60 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Explorer 1000 v2
- Jackery Explorer 1000 v2: solar input 12 to 60 V on the Solar in 1 (DC8020). Jackery rates this input by working voltage (Vmp), so that is the number we hold to the limit. We still warn when the cold-morning open-circuit voltage goes over it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.3 V becomes 23.3 V.
- Current over the 10.5 A cap is safe: the station takes 10.5 A and you get fewer watts. We count only the capped watts.
- Max 200 W on this input, 400 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.