Will the Jackery SolarSaga 100 Prime work with the Jackery Explorer 1000 Plus?
Yes. One Jackery SolarSaga 100 Prime works with the Jackery Explorer 1000 Plus: about 24.9 V on a 20°F morning against the station's 60 V limit, and about 99 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 198 W.
Works
1 x SolarSaga 100 Prime into the Explorer 1000 Plus (1 panel on DC8020) stays inside 12 to 60 V and under 11 A, even at 20F.
- Jackery's manual: if you use both inputs, put the same type and number of panels on each.
- Model JS-100E in the manual. Bifacial: 108 W with light on the back (BNPI).
- Needs an MC4 to DC8020 adapter cable.
100 W, open-circuit 22.7 V, short-circuit 5.5 A, working 18.7 V / 5.3 A. Manual Panel details
Jackery Explorer 1000 PlusSolar input DC8020: 12 to 60 V; DC8020: 12 to 60 V, 800 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on DC8020 + 1 panel on DC8020 Best option | DC8020 + DC8020 | 24.9 | 5.3 | 198 | Works |
| 2 panels in parallel on DC8020 | DC8020 | 24.9 | 10.6 | 198 | Works |
| 2 panels in series on DC8020 | DC8020 | 49.7 | 5.3 | 198 | Works |
Quick answers
Will the Jackery SolarSaga 100 Prime work with the Jackery Explorer 1000 Plus?
Yes. One Jackery SolarSaga 100 Prime works with the Jackery Explorer 1000 Plus: about 24.9 V on a 20°F morning against the station's 60 V limit, and about 99 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 198 W.
Can I connect two SolarSaga 100 Prime panels to the Explorer 1000 Plus?
Yes, 1 panel on DC8020 + 1 panel on DC8020. That gives about 198 W.
What cable do I need to connect the SolarSaga 100 Prime to the Explorer 1000 Plus?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One SolarSaga 100 Prime goes from 22.7 V on its label to about 24.9 V at 20°F and 25.6 V at 0°F. The Explorer 1000 Plus accepts up to 60 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Explorer 1000 Plus
- Jackery Explorer 1000 Plus: solar input 12 to 60 V on the Solar in 1 (DC8020). Jackery rates this input by working voltage (Vmp), so that is the number we hold to the limit. We still warn when the cold-morning open-circuit voltage goes over it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 22.7 V becomes 24.9 V.
- Current over the 11 A cap is safe: the station takes 11 A and you get fewer watts. We count only the capped watts.
- Max 400 W on this input, 800 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.