We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the EcoFlow DELTA Pro Ultra X?

No. Open-circuit voltage 21.5V is below the 80V minimum for this input, so it will not start charging. Two panels: don't connect (1 panel on High-PV + 1 panel on High-PV), about 0 W.

Verdict

Don't connect

Do not plug this in. Open-circuit voltage 21.5V is below the 80V minimum for this input, so it will not start charging.

1 x NextGen 220W Bifacial Portable Solar Panel1 panel on High-PV
DELTA Pro Ultra XHigh-PV
Expected
0W
Voltage at 20F
23.5V
limit 500 V
Current
11.9A
cap 15 A
  • Open-circuit voltage 21.5V is below the 80V minimum for this input, so it will not start charging.
Cables to buyNone. Do not connect this combination. Pick a panel with lower open-circuit voltage, or fewer in series.
EcoFlow NextGen 220W Bifacial Portable Solar Panel

220 W, open-circuit 21.5 V, short-circuit 12.4 A, working 18.4 V / 11.9 A. Brand page Panel details

EcoFlow DELTA Pro Ultra X

Solar input High-PV: 80 to 500 V; High-PV: 80 to 500 V, 10000 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
1 panel on High-PV + 1 panel on High-PV
Open-circuit voltage 21.5V is below the 80V minimum for this input, so it will not start charging.
High-PV + High-PV23.511.90Don't connect
2 panels in parallel on High-PV
Open-circuit voltage 21.5V is below the 80V minimum for this input, so it will not start charging.
High-PV23.523.80Don't connect
2 panels in series on High-PV
Open-circuit voltage 43V is below the 80V minimum for this input, so it will not start charging.
High-PV47.111.90Don't connect

Quick answers

Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the EcoFlow DELTA Pro Ultra X?

No. Open-circuit voltage 21.5V is below the 80V minimum for this input, so it will not start charging. Two panels: don't connect (1 panel on High-PV + 1 panel on High-PV), about 0 W.

Can I connect two NextGen 220W Bifacial Portable Solar Panel panels to the DELTA Pro Ultra X?

No: Open-circuit voltage 21.5V is below the 80V minimum for this input, so it will not start charging.

Is it safe on a cold morning?

Panel voltage rises in the cold. One NextGen 220W Bifacial Portable Solar Panel goes from 21.5 V on its label to about 23.5 V at 20°F and 24.3 V at 0°F. The DELTA Pro Ultra X accepts up to 500 V on the High-PV.

Where to buy

$7,999 at the EcoFlow store, Oct 28, 2026
BuyAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Rules we applied
  • EcoFlow DELTA Pro Ultra X: solar input 80 to 500 V on the Solar in 1 (High-PV). EcoFlow sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.5 V becomes 23.5 V.
  • Current over the 15 A cap is safe: the station takes 15 A and you get fewer watts. We count only the capped watts.
  • Max 5,000 W on this input, 10,000 W across all inputs.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources