Will the Renogy E.Flex 200W Portable Solar Panel work with the DJI Power 500?
Yes. One Renogy E.Flex 200W Portable Solar Panel works with the DJI Power 500: about 25.6 V on a 20°F morning against the station's 30 V limit, and about 200 W in full sun. Two panels: works (1 panel on XT60, Solar Panel Adapter Module channel 1 + 1 panel on XT60, Solar Panel Adapter Module channel 2), about 300 W.
Works
1 x E.Flex 200W Portable Solar Panel into the Power 500 (1 panel on XT60, Solar Panel Adapter Module channel 1) stays inside 12 to 30 V and under 10 A, even at 20F.
- Solar needs the DJI Power Solar Panel Adapter Module (MPPT), sold separately: three XT60 inputs, each 12 to 30 V, up to 10 A and 200 W. DJI says each panel must stay under 30 V open-circuit, so most 100 W and 200 W 12 V panels fit one per input, never two in series.
- On the Power 500 the adapter delivers at most 300 W in total.
- Use an MC4 to XT60 solar cable.
200 W, open-circuit 23.4 V, short-circuit 10.5 A, working 20.2 V / 9.9 A. Brand page Panel details
DJI Power 500Solar input XT60, Solar Panel Adapter Module channel 1: 12 to 30 V; XT60, Solar Panel Adapter Module channel 2: 12 to 30 V; XT60, Solar Panel Adapter Module channel 3: 12 to 30 V, 300 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on XT60, Solar Panel Adapter Module channel 1 + 1 panel on XT60, Solar Panel Adapter Module channel 2 Best option | XT60, Solar Panel Adapter Module channel 1 + XT60, Solar Panel Adapter Module channel 2 | 25.6 | 9.9 | 300 | Works |
| 2 panels in parallel on XT60, Solar Panel Adapter Module channel 1 The panels can push 19.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts. | XT60, Solar Panel Adapter Module channel 1 | 25.6 | 19.8 | 200 | Works |
| 2 panels in parallel on XT60, Solar Panel Adapter Module channel 2 The panels can push 19.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts. | XT60, Solar Panel Adapter Module channel 2 | 25.6 | 19.8 | 200 | Works |
| 2 panels in parallel on XT60, Solar Panel Adapter Module channel 3 The panels can push 19.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts. | XT60, Solar Panel Adapter Module channel 3 | 25.6 | 19.8 | 200 | Works |
| 2 panels in series on XT60, Solar Panel Adapter Module channel 1 Open-circuit voltage 46.8V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | XT60, Solar Panel Adapter Module channel 1 | 51.2 | 9.9 | 0 | Don't connect |
| 2 panels in series on XT60, Solar Panel Adapter Module channel 2 Open-circuit voltage 46.8V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | XT60, Solar Panel Adapter Module channel 2 | 51.2 | 9.9 | 0 | Don't connect |
| 2 panels in series on XT60, Solar Panel Adapter Module channel 3 Open-circuit voltage 46.8V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | XT60, Solar Panel Adapter Module channel 3 | 51.2 | 9.9 | 0 | Don't connect |
Quick answers
Will the Renogy E.Flex 200W Portable Solar Panel work with the DJI Power 500?
Yes. One Renogy E.Flex 200W Portable Solar Panel works with the DJI Power 500: about 25.6 V on a 20°F morning against the station's 30 V limit, and about 200 W in full sun. Two panels: works (1 panel on XT60, Solar Panel Adapter Module channel 1 + 1 panel on XT60, Solar Panel Adapter Module channel 2), about 300 W.
Can I connect two E.Flex 200W Portable Solar Panel panels to the Power 500?
Yes, 1 panel on XT60, Solar Panel Adapter Module channel 1 + 1 panel on XT60, Solar Panel Adapter Module channel 2. That gives about 300 W.
What cable do I need to connect the E.Flex 200W Portable Solar Panel to the Power 500?
Use an MC4 to XT60 solar cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One E.Flex 200W Portable Solar Panel goes from 23.4 V on its label to about 25.6 V at 20°F and 26.4 V at 0°F. The Power 500 accepts up to 30 V on the XT60, Solar Panel Adapter Module channel 1.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Power 500
- DJI Power 500: solar input 12 to 30 V on the Solar in 1 (XT60, Solar Panel Adapter Module channel 1). DJI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 23.4 V becomes 25.6 V.
- Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
- Max 200 W on this input, 300 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.