Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the BLUETTI Premium 100 V2?
Yes. One EcoFlow NextGen 220W Bifacial Portable Solar Panel works with the BLUETTI Premium 100 V2: about 23.5 V on a 20°F morning against the station's 60 V limit, and about 219 W in full sun. Two panels: works (2 panels in series on DC input), about 438 W.
Works
1 x NextGen 220W Bifacial Portable Solar Panel into the Premium 100 V2 (1 panel on DC input) stays inside 12 to 60 V and under 20 A, even at 20F.
- Use the solar charging cable that came with the station (MC4 on the panel side).
220 W, open-circuit 21.5 V, short-circuit 12.4 A, working 18.4 V / 11.9 A. Brand page Panel details
BLUETTI Premium 100 V2Solar input DC input: 12 to 60 V, 1000 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in series on DC input Best option | DC input | 47.1 | 11.9 | 438 | Works |
| 2 panels in parallel on DC input The panels can push 23.8A but this input takes 20A, so the station caps it. Safe, you just lose some watts. | DC input | 23.5 | 23.8 | 368 | Works |
Quick answers
Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the BLUETTI Premium 100 V2?
Yes. One EcoFlow NextGen 220W Bifacial Portable Solar Panel works with the BLUETTI Premium 100 V2: about 23.5 V on a 20°F morning against the station's 60 V limit, and about 219 W in full sun. Two panels: works (2 panels in series on DC input), about 438 W.
Can I connect two NextGen 220W Bifacial Portable Solar Panel panels to the Premium 100 V2?
Yes, 2 panels in series on DC input. That gives about 438 W.
What cable do I need to connect the NextGen 220W Bifacial Portable Solar Panel to the Premium 100 V2?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One NextGen 220W Bifacial Portable Solar Panel goes from 21.5 V on its label to about 23.5 V at 20°F and 24.3 V at 0°F. The Premium 100 V2 accepts up to 60 V on the DC input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Premium 100 V2
- BLUETTI Premium 100 V2: solar input 12 to 60 V on the Solar in (DC input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.5 V becomes 23.5 V.
- Current over the 20 A cap is safe: the station takes 20 A and you get fewer watts. We count only the capped watts.
- Max 1,000 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.