Will the EcoFlow 100W Rigid Solar Panel work with the BLUETTI Premium 100 V2?
Yes. One EcoFlow 100W Rigid Solar Panel works with the BLUETTI Premium 100 V2: about 22.4 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on DC input), about 200 W.
Works
1 x 100W Rigid Solar Panel into the Premium 100 V2 (1 panel on DC input) stays inside 12 to 60 V and under 20 A, even at 20F.
- Use the solar charging cable that came with the station (MC4 on the panel side).
100 W, open-circuit 20.3 V, short-circuit 6.3 A, working 17.1 V / 5.9 A. Brand page Panel details
BLUETTI Premium 100 V2Solar input DC input: 12 to 60 V, 1000 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on DC input Best option | DC input | 22.4 | 11.8 | 200 | Works |
| 2 panels in series on DC input | DC input | 44.8 | 5.9 | 200 | Works |
Quick answers
Will the EcoFlow 100W Rigid Solar Panel work with the BLUETTI Premium 100 V2?
Yes. One EcoFlow 100W Rigid Solar Panel works with the BLUETTI Premium 100 V2: about 22.4 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on DC input), about 200 W.
Can I connect two 100W Rigid Solar Panel panels to the Premium 100 V2?
Yes, 2 panels in parallel on DC input. That gives about 200 W.
What cable do I need to connect the 100W Rigid Solar Panel to the Premium 100 V2?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One 100W Rigid Solar Panel goes from 20.3 V on its label to about 22.4 V at 20°F and 23.2 V at 0°F. The Premium 100 V2 accepts up to 60 V on the DC input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Premium 100 V2
- BLUETTI Premium 100 V2: solar input 12 to 60 V on the Solar in (DC input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.33% per °C below 77F (25°C), this panel's own figure. At 20F one panel's 20.3 V becomes 22.4 V.
- Current over the 20 A cap is safe: the station takes 20 A and you get fewer watts. We count only the capped watts.
- Max 1,000 W on this input.
- Cold-morning voltage uses this panel's own coefficient from its manual, 0.33% per °C.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.