Will the Rich Solar MEGA 200 PRO FLEX (24V) work with the BLUETTI EP500Pro?
Yes. One Rich Solar MEGA 200 PRO FLEX (24V) works with the BLUETTI EP500Pro: about 44.7 V on a 20°F morning against the station's 150 V limit, and about 200 W in full sun. Two panels: works (1 panel on PV input + 1 panel on PV input), about 400 W.
Works
1 x MEGA 200 PRO FLEX (24V) into the EP500Pro (1 panel on PV input) stays inside 12 to 150 V and under 12 A, even at 20F.
- A 24 V panel: 40.8 V open circuit on its own, so two in series only suit high-voltage solar inputs.
- Use the solar charging cable that came with the station (MC4 on the panel side).
200 W, open-circuit 40.8 V, short-circuit 6.2 A, working 34.2 V / 5.9 A. Brand page Panel details
BLUETTI EP500ProSolar input PV input: 12 to 150 V; PV input: 12 to 150 V, 2400 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on PV input + 1 panel on PV input Best option | PV input + PV input | 44.7 | 5.9 | 400 | Works |
| 2 panels in parallel on PV input | PV input | 44.7 | 11.7 | 400 | Works |
| 2 panels in series on PV input | PV input | 89.4 | 5.9 | 400 | Works |
Quick answers
Will the Rich Solar MEGA 200 PRO FLEX (24V) work with the BLUETTI EP500Pro?
Yes. One Rich Solar MEGA 200 PRO FLEX (24V) works with the BLUETTI EP500Pro: about 44.7 V on a 20°F morning against the station's 150 V limit, and about 200 W in full sun. Two panels: works (1 panel on PV input + 1 panel on PV input), about 400 W.
Can I connect two MEGA 200 PRO FLEX (24V) panels to the EP500Pro?
Yes, 1 panel on PV input + 1 panel on PV input. That gives about 400 W.
What cable do I need to connect the MEGA 200 PRO FLEX (24V) to the EP500Pro?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One MEGA 200 PRO FLEX (24V) goes from 40.8 V on its label to about 44.7 V at 20°F and 46 V at 0°F. The EP500Pro accepts up to 150 V on the PV input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the EP500Pro
- BLUETTI EP500Pro: solar input 12 to 150 V on the Solar in 1 (PV input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 40.8 V becomes 44.7 V.
- Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
- Max 1,200 W on this input, 2,400 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.