Will the BLUETTI PV350D work with the BLUETTI EP500Pro?
Yes. One BLUETTI PV350D works with the BLUETTI EP500Pro: about 36.1 V on a 20°F morning against the station's 150 V limit, and about 331 W in full sun. Two panels: works (1 panel on PV input + 1 panel on PV input), about 662 W.
Works
1 x PV350D into the EP500Pro (1 panel on PV input) stays inside 12 to 150 V, even at 20F. The station caps the current at 12 A.
- The panels can push 12.7A but this input takes 12A, so the station caps it. Safe, you just lose some watts.
- The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.
350 W, open-circuit 33 V, short-circuit 13.8 A, working 27.6 V / 12.7 A. Manual Panel details
BLUETTI EP500ProSolar input PV input: 12 to 150 V; PV input: 12 to 150 V, 2400 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on PV input + 1 panel on PV input The panels can push 12.7A but this input takes 12A, so the station caps it. Safe, you just lose some watts. | PV input + PV input | 36.1 | 12.7 | 662 | Works |
| 2 panels in series on PV input The panels can push 12.7A but this input takes 12A, so the station caps it. Safe, you just lose some watts. | PV input | 72.3 | 12.7 | 662 | Works |
| 2 panels in parallel on PV input The panels can push 25.4A but this input takes 12A, so the station caps it. Safe, you just lose some watts. | PV input | 36.1 | 25.4 | 331 | Works |
Quick answers
Will the BLUETTI PV350D work with the BLUETTI EP500Pro?
Yes. One BLUETTI PV350D works with the BLUETTI EP500Pro: about 36.1 V on a 20°F morning against the station's 150 V limit, and about 331 W in full sun. Two panels: works (1 panel on PV input + 1 panel on PV input), about 662 W.
Can I connect two PV350D panels to the EP500Pro?
Yes, 1 panel on PV input + 1 panel on PV input. That gives about 662 W.
What cable do I need to connect the PV350D to the EP500Pro?
The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One PV350D goes from 33 V on its label to about 36.1 V at 20°F and 37.2 V at 0°F. The EP500Pro accepts up to 150 V on the PV input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the EP500Pro
- BLUETTI EP500Pro: solar input 12 to 150 V on the Solar in 1 (PV input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 33 V becomes 36.1 V.
- Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
- Max 1,200 W on this input, 2,400 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.