Will the Renogy 100W Lightweight Flexible Solar Panel work with the BLUETTI EP500Pro?
Yes. One Renogy 100W Lightweight Flexible Solar Panel works with the BLUETTI EP500Pro: about 24.6 V on a 20°F morning against the station's 150 V limit, and about 100 W in full sun. Two panels: works (1 panel on PV input + 1 panel on PV input), about 200 W.
Works
1 x 100W Lightweight Flexible Solar Panel into the EP500Pro (1 panel on PV input) stays inside 12 to 150 V and under 12 A, even at 20F.
- Use the solar charging cable that came with the station (MC4 on the panel side).
100 W, open-circuit 22.5 V, short-circuit 5.8 A, working 18.9 V / 5.3 A. Brand page Panel details
BLUETTI EP500ProSolar input PV input: 12 to 150 V; PV input: 12 to 150 V, 2400 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on PV input + 1 panel on PV input Best option | PV input + PV input | 24.6 | 5.3 | 200 | Works |
| 2 panels in parallel on PV input | PV input | 24.6 | 10.6 | 200 | Works |
| 2 panels in series on PV input | PV input | 49.3 | 5.3 | 200 | Works |
Quick answers
Will the Renogy 100W Lightweight Flexible Solar Panel work with the BLUETTI EP500Pro?
Yes. One Renogy 100W Lightweight Flexible Solar Panel works with the BLUETTI EP500Pro: about 24.6 V on a 20°F morning against the station's 150 V limit, and about 100 W in full sun. Two panels: works (1 panel on PV input + 1 panel on PV input), about 200 W.
Can I connect two 100W Lightweight Flexible Solar Panel panels to the EP500Pro?
Yes, 1 panel on PV input + 1 panel on PV input. That gives about 200 W.
What cable do I need to connect the 100W Lightweight Flexible Solar Panel to the EP500Pro?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One 100W Lightweight Flexible Solar Panel goes from 22.5 V on its label to about 24.6 V at 20°F and 25.4 V at 0°F. The EP500Pro accepts up to 150 V on the PV input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the EP500Pro
- BLUETTI EP500Pro: solar input 12 to 150 V on the Solar in 1 (PV input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 22.5 V becomes 24.6 V.
- Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
- Max 1,200 W on this input, 2,400 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.