We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the EcoFlow 110W Portable Solar Panel work with the BLUETTI EB70S?

Yes. One EcoFlow 110W Portable Solar Panel works with the BLUETTI EB70S: about 23.9 V on a 20°F morning against the station's 28 V limit, and about 110 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 147 W.

Verdict

Works

1 x 110W Portable Solar Panel into the EB70S (1 panel on Solar input) stays inside 12 to 28 V and under 8 A, even at 20F.

1 x 110W Portable Solar Panel1 panel on Solar input
EB70SSolar input
Expected
110W
Voltage at 20F
23.9V
limit 28 V
Current
6A
cap 8 A
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
EcoFlow 110W Portable Solar Panel

110 W, open-circuit 21.8 V, short-circuit 6.5 A, working 18.4 V / 6 A. Brand page Panel details

BLUETTI EB70S

Solar input Solar input: 12 to 28 V, 200 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
The panels can push 12A but this input takes 8A, so the station caps it. Safe, you just lose some watts.
Solar input23.912147Works
2 panels in series on Solar input
Open-circuit voltage 43.6V is above the station's 28V limit. Going over a station's input voltage limit can damage it.
Solar input47.760Don't connect

Quick answers

Will the EcoFlow 110W Portable Solar Panel work with the BLUETTI EB70S?

Yes. One EcoFlow 110W Portable Solar Panel works with the BLUETTI EB70S: about 23.9 V on a 20°F morning against the station's 28 V limit, and about 110 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 147 W.

Can I connect two 110W Portable Solar Panel panels to the EB70S?

Yes, 2 panels in parallel on Solar input. That gives about 147 W.

What cable do I need to connect the 110W Portable Solar Panel to the EB70S?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One 110W Portable Solar Panel goes from 21.8 V on its label to about 23.9 V at 20°F and 24.6 V at 0°F. The EB70S accepts up to 28 V on the Solar input.

Where to buy

$259 at the EcoFlow store, Oct 28, 2026
BuyAmazon
Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the EB70S

→BLUETTI SP200L Solar Panel, about 200 W with two
→EcoFlow 175W Rigid Solar Panel, about 178 W with two
→BLUETTI SP100L Solar Panel, about 164 W with two
→BLUETTI PV200D, about 163 W with two
→Renogy E.Flex 200W Portable Solar Panel, about 161 W with two

All 33 panels checked against the EB70S

Rules we applied
  • BLUETTI EB70S: solar input 12 to 28 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.8 V becomes 23.9 V.
  • Current over the 8 A cap is safe: the station takes 8 A and you get fewer watts. We count only the capped watts.
  • Max 200 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pageEB70S spec page, solar input
Checked Oct 28, 2026