We may earn a commission if you buy through these links. It never changes a verdict. How this works

Will the BLUETTI PV120 Solar Panel work with the BLUETTI EB70S?

Yes. One BLUETTI PV120 Solar Panel works with the BLUETTI EB70S: about 26.7 V on a 20°F morning against the station's 28 V limit, and about 120 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 157 W.

Verdict

Works

1 x PV120 Solar Panel into the EB70S (1 panel on Solar input) stays inside 12 to 28 V and under 8 A, even at 20F.

1 x PV120 Solar Panel1 panel on Solar input
EB70SSolar input
Expected
120W
Voltage at 20F
26.7V
limit 28 V
Current
6.1A
cap 8 A
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
BLUETTI PV120 Solar Panel

120 W, open-circuit 24.4 V, short-circuit 6.4 A, working 19.6 V / 6.1 A. Brand page Panel details

BLUETTI EB70S

Solar input Solar input: 12 to 28 V, 200 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
The panels can push 12.2A but this input takes 8A, so the station caps it. Safe, you just lose some watts.
Solar input26.712.2157Works
2 panels in series on Solar input
Open-circuit voltage 48.8V is above the station's 28V limit. Going over a station's input voltage limit can damage it.
Solar input53.46.10Don't connect

Quick answers

Will the BLUETTI PV120 Solar Panel work with the BLUETTI EB70S?

Yes. One BLUETTI PV120 Solar Panel works with the BLUETTI EB70S: about 26.7 V on a 20°F morning against the station's 28 V limit, and about 120 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 157 W.

Can I connect two PV120 Solar Panel panels to the EB70S?

Yes, 2 panels in parallel on Solar input. That gives about 157 W.

What cable do I need to connect the PV120 Solar Panel to the EB70S?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One PV120 Solar Panel goes from 24.4 V on its label to about 26.7 V at 20°F and 27.5 V at 0°F. The EB70S accepts up to 28 V on the Solar input.

Where to buy

Out of stock at the BLUETTI store
View at store
Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the EB70S

→BLUETTI PV200D, about 200 W with two
→BLUETTI SP100L Solar Panel, about 200 W with two
→BLUETTI SP200L Solar Panel, about 200 W with two
→EcoFlow 175W Rigid Solar Panel, about 178 W with two
→Renogy E.Flex 200W Portable Solar Panel, about 161 W with two

All 33 panels checked against the EB70S

Rules we applied
  • BLUETTI EB70S: solar input 12 to 28 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 24.4 V becomes 26.7 V.
  • Current over the 8 A cap is safe: the station takes 8 A and you get fewer watts. We count only the capped watts.
  • Max 200 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pageEB70S spec page, solar input
From the brand's pagePV120 Solar Panel label values
Checked Oct 28, 2026