We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Renogy E.Flex 200W Portable Solar Panel work with the BLUETTI Pioneer 150 (AC240)?

Yes. One Renogy E.Flex 200W Portable Solar Panel works with the BLUETTI Pioneer 150 (AC240): about 25.6 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 400 W.

Verdict

Works

1 x E.Flex 200W Portable Solar Panel into the Pioneer 150 (AC240) (1 panel on Solar input) stays inside 11 to 60 V and under 21 A, even at 20F.

1 x E.Flex 200W Portable Solar Panel1 panel on Solar input
Pioneer 150 (AC240)Solar input
Expected
200W
Voltage at 20F
25.6V
limit 60 V
Current
9.9A
cap 21 A
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
Renogy E.Flex 200W Portable Solar Panel

200 W, open-circuit 23.4 V, short-circuit 10.5 A, working 20.2 V / 9.9 A. Brand page Panel details

BLUETTI Pioneer 150 (AC240)

Solar input Solar input: 11 to 60 V, 1200 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
Best option
Solar input25.619.8400Works
2 panels in series on Solar input
Solar input51.29.9400Works

Quick answers

Will the Renogy E.Flex 200W Portable Solar Panel work with the BLUETTI Pioneer 150 (AC240)?

Yes. One Renogy E.Flex 200W Portable Solar Panel works with the BLUETTI Pioneer 150 (AC240): about 25.6 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 400 W.

Can I connect two E.Flex 200W Portable Solar Panel panels to the Pioneer 150 (AC240)?

Yes, 2 panels in parallel on Solar input. That gives about 400 W.

What cable do I need to connect the E.Flex 200W Portable Solar Panel to the Pioneer 150 (AC240)?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One E.Flex 200W Portable Solar Panel goes from 23.4 V on its label to about 25.6 V at 20°F and 26.4 V at 0°F. The Pioneer 150 (AC240) accepts up to 60 V on the Solar input.

Where to buy

$220 at the Renogy store, Oct 28, 2026
BuyAmazon
Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the Pioneer 150 (AC240)

→EcoFlow 400W Portable Solar Panel, about 800 W with two
→BLUETTI PV350D, about 580 W with two
→Renogy 250W N-Type Bifacial Solar Panel, about 500 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 438 W with two
→Jackery SolarSaga 200 (JS-200E), about 400 W with two

All 33 panels checked against the Pioneer 150 (AC240)

Rules we applied
  • BLUETTI Pioneer 150 (AC240): solar input 11 to 60 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 23.4 V becomes 25.6 V.
  • Current over the 21 A cap is safe: the station takes 21 A and you get fewer watts. We count only the capped watts.
  • Max 1,200 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
Checked Oct 28, 2026