We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the EcoFlow 100W Rigid Solar Panel work with the BLUETTI Pioneer 150 (AC240)?

Yes. One EcoFlow 100W Rigid Solar Panel works with the BLUETTI Pioneer 150 (AC240): about 22.4 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.

Verdict

Works

1 x 100W Rigid Solar Panel into the Pioneer 150 (AC240) (1 panel on Solar input) stays inside 11 to 60 V and under 21 A, even at 20F.

1 x 100W Rigid Solar Panel1 panel on Solar input
Pioneer 150 (AC240)Solar input
Expected
100W
Voltage at 20F
22.4V
limit 60 V
Current
5.9A
cap 21 A
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
EcoFlow 100W Rigid Solar Panel

100 W, open-circuit 20.3 V, short-circuit 6.3 A, working 17.1 V / 5.9 A. Brand page Panel details

BLUETTI Pioneer 150 (AC240)

Solar input Solar input: 11 to 60 V, 1200 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
Best option
Solar input22.411.8200Works
2 panels in series on Solar input
Solar input44.85.9200Works

Quick answers

Will the EcoFlow 100W Rigid Solar Panel work with the BLUETTI Pioneer 150 (AC240)?

Yes. One EcoFlow 100W Rigid Solar Panel works with the BLUETTI Pioneer 150 (AC240): about 22.4 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.

Can I connect two 100W Rigid Solar Panel panels to the Pioneer 150 (AC240)?

Yes, 2 panels in parallel on Solar input. That gives about 200 W.

What cable do I need to connect the 100W Rigid Solar Panel to the Pioneer 150 (AC240)?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One 100W Rigid Solar Panel goes from 20.3 V on its label to about 22.4 V at 20°F and 23.2 V at 0°F. The Pioneer 150 (AC240) accepts up to 60 V on the Solar input.

Where to buy

Out of stock at the EcoFlow store
View at store
Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the Pioneer 150 (AC240)

→EcoFlow 400W Portable Solar Panel, about 800 W with two
→BLUETTI PV350D, about 580 W with two
→Renogy 250W N-Type Bifacial Solar Panel, about 500 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 438 W with two
→Jackery SolarSaga 200 (JS-200E), about 400 W with two

All 33 panels checked against the Pioneer 150 (AC240)

Rules we applied
  • BLUETTI Pioneer 150 (AC240): solar input 11 to 60 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.33% per °C below 77F (25°C), this panel's own figure. At 20F one panel's 20.3 V becomes 22.4 V.
  • Current over the 21 A cap is safe: the station takes 21 A and you get fewer watts. We count only the capped watts.
  • Max 1,200 W on this input.
Assumptions
  • Cold-morning voltage uses this panel's own coefficient from its manual, 0.33% per °C.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
Checked Oct 28, 2026