Will the Rich Solar MEGA 200 PRO FLEX (24V) work with the BLUETTI AC200P?
Yes, with a catch. Working voltage 34.2V is below the 35V minimum, so charging may drop out in weak light. Two panels: works (2 panels in series on Solar input), about 400 W.
Works, with a catch
It charges, but read the note. Best option: 1 panel on Solar input.
- Working voltage 34.2V is below the 35V minimum, so charging may drop out in weak light.
- A 24 V panel: 40.8 V open circuit on its own, so two in series only suit high-voltage solar inputs.
- Use the solar charging cable that came with the station (MC4 on the panel side).
200 W, open-circuit 40.8 V, short-circuit 6.2 A, working 34.2 V / 5.9 A. Brand page Panel details
BLUETTI AC200PSolar input Solar input: 35 to 150 V, 700 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in series on Solar input Best option | Solar input | 89.4 | 5.9 | 400 | Works |
| 2 panels in parallel on Solar input Working voltage 34.2V is below the 35V minimum, so charging may drop out in weak light. | Solar input | 44.7 | 11.7 | 400 | Works, with a catch |
Quick answers
Will the Rich Solar MEGA 200 PRO FLEX (24V) work with the BLUETTI AC200P?
Yes, with a catch. Working voltage 34.2V is below the 35V minimum, so charging may drop out in weak light. Two panels: works (2 panels in series on Solar input), about 400 W.
Can I connect two MEGA 200 PRO FLEX (24V) panels to the AC200P?
Yes, 2 panels in series on Solar input. That gives about 400 W.
What cable do I need to connect the MEGA 200 PRO FLEX (24V) to the AC200P?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One MEGA 200 PRO FLEX (24V) goes from 40.8 V on its label to about 44.7 V at 20°F and 46 V at 0°F. The AC200P accepts up to 150 V on the Solar input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the AC200P
- BLUETTI AC200P: solar input 35 to 150 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 40.8 V becomes 44.7 V.
- Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
- Max 700 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.