We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the BLUETTI PV100 FX Flexible Solar Panel work with the BLUETTI AC200P?

Yes. One BLUETTI PV100 FX Flexible Solar Panel works with the BLUETTI AC200P: about 45.3 V on a 20°F morning against the station's 150 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.

Verdict

Works

1 x PV100 FX Flexible Solar Panel into the AC200P (1 panel on Solar input) stays inside 35 to 150 V and under 12 A, even at 20F.

1 x PV100 FX Flexible Solar Panel1 panel on Solar input
AC200PSolar input
Expected
100W
Voltage at 20F
45.3V
limit 150 V
Current
3.1A
cap 12 A
  • 41.4 V open circuit is high for a 100 W panel: two in series reach 82.8 V, more than most stations take.
  • The BLUETTI US store sells it only in sets of 2 or more.
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
BLUETTI PV100 FX Flexible Solar Panel

100 W, open-circuit 41.4 V, short-circuit 3.1 A. Brand page Panel details

BLUETTI AC200P

Solar input Solar input: 35 to 150 V, 700 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
Best option
Solar input45.36.1200Works
2 panels in series on Solar input
Solar input90.73.1200Works

Quick answers

Will the BLUETTI PV100 FX Flexible Solar Panel work with the BLUETTI AC200P?

Yes. One BLUETTI PV100 FX Flexible Solar Panel works with the BLUETTI AC200P: about 45.3 V on a 20°F morning against the station's 150 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.

Can I connect two PV100 FX Flexible Solar Panel panels to the AC200P?

Yes, 2 panels in parallel on Solar input. That gives about 200 W.

What cable do I need to connect the PV100 FX Flexible Solar Panel to the AC200P?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One PV100 FX Flexible Solar Panel goes from 41.4 V on its label to about 45.3 V at 20°F and 46.7 V at 0°F. The AC200P accepts up to 150 V on the Solar input.

Where to buy

Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the AC200P

→EcoFlow 400W Portable Solar Panel, about 700 W with two
→Anker SOLIX PS400 Bifacial, about 700 W with two
→Rich Solar MEGA 200 PRO (24V), about 400 W with two
→Anker SOLIX PS200 Bifacial, about 399 W with two

All 33 panels checked against the AC200P

Rules we applied
  • BLUETTI AC200P: solar input 35 to 150 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 41.4 V becomes 45.3 V.
  • Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
  • Max 700 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pageAC200P spec page, solar input
Checked Oct 28, 2026