We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Anker SOLIX PS100 Bifacial work with the BLUETTI AC200MAX?

Yes. One Anker SOLIX PS100 Bifacial works with the BLUETTI AC200MAX: about 28.4 V on a 20°F morning against the station's 145 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.

Verdict

Works

1 x PS100 Bifacial into the AC200MAX (1 panel on Solar input) stays inside 10 to 145 V and under 15 A, even at 20F.

1 x PS100 Bifacial1 panel on Solar input
AC200MAXSolar input
Expected
100W
Voltage at 20F
28.4V
limit 145 V
Current
4.6A
cap 15 A
Cables to buy
  • Check the station's manual for the right solar cable.
Anker SOLIX PS100 Bifacial

100 W, open-circuit 25.9 V, short-circuit 4.9 A, working 21.6 V / 4.6 A. Unconfirmed Panel details

BLUETTI AC200MAX

Solar input Solar input: 10 to 145 V, 900 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
Best option
Solar input28.49.3200Works
2 panels in series on Solar input
Solar input56.74.6200Works

Quick answers

Will the Anker SOLIX PS100 Bifacial work with the BLUETTI AC200MAX?

Yes. One Anker SOLIX PS100 Bifacial works with the BLUETTI AC200MAX: about 28.4 V on a 20°F morning against the station's 145 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.

Can I connect two PS100 Bifacial panels to the AC200MAX?

Yes, 2 panels in parallel on Solar input. That gives about 200 W.

What cable do I need to connect the PS100 Bifacial to the AC200MAX?

Check the station's manual for the right solar cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One PS100 Bifacial goes from 25.9 V on its label to about 28.4 V at 20°F and 29.2 V at 0°F. The AC200MAX accepts up to 145 V on the Solar input.

Where to buy

$300 at the Anker SOLIX store, Oct 28, 2026
BuyAmazon
Out of stock at the BLUETTI store
View at storeAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the AC200MAX

→EcoFlow 400W Portable Solar Panel, about 800 W with two
→Anker SOLIX PS400 Bifacial, about 800 W with two
→BLUETTI PV350D, about 700 W with two
→Renogy 250W N-Type Bifacial Solar Panel, about 500 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 438 W with two

All 33 panels checked against the AC200MAX

Rules we applied
  • BLUETTI AC200MAX: solar input 10 to 145 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 25.9 V becomes 28.4 V.
  • Current over the 15 A cap is safe: the station takes 15 A and you get fewer watts. We count only the capped watts.
  • Max 900 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
  • Some numbers for Anker SOLIX PS100 Bifacial come from a shop listing we have not confirmed in the manual yet.
Sources
From the brand's pageAC200MAX spec page, solar input
Shop listing, not yet confirmedPS100 Bifacial label values
Checked Oct 28, 2026