Will the EcoFlow 100W Rigid Solar Panel work with the BLUETTI Pioneer MD (AC180T)?
Yes. One EcoFlow 100W Rigid Solar Panel works with the BLUETTI Pioneer MD (AC180T): about 22.4 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.
Works
1 x 100W Rigid Solar Panel into the Pioneer MD (AC180T) (1 panel on Solar input) stays inside 12 to 60 V, even at 20F.
- The manual or page does not give a current limit for this input, so current was not checked.
- Use the solar charging cable that came with the station (MC4 on the panel side).
100 W, open-circuit 20.3 V, short-circuit 6.3 A, working 17.1 V / 5.9 A. Brand page Panel details
BLUETTI Pioneer MD (AC180T)Solar input Solar input: 12 to 60 V, 500 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on Solar input The manual or page does not give a current limit for this input, so current was not checked. | Solar input | 22.4 | 11.8 | 200 | Works |
| 2 panels in series on Solar input The manual or page does not give a current limit for this input, so current was not checked. | Solar input | 44.8 | 5.9 | 200 | Works |
Quick answers
Will the EcoFlow 100W Rigid Solar Panel work with the BLUETTI Pioneer MD (AC180T)?
Yes. One EcoFlow 100W Rigid Solar Panel works with the BLUETTI Pioneer MD (AC180T): about 22.4 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.
Can I connect two 100W Rigid Solar Panel panels to the Pioneer MD (AC180T)?
Yes, 2 panels in parallel on Solar input. That gives about 200 W.
What cable do I need to connect the 100W Rigid Solar Panel to the Pioneer MD (AC180T)?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One 100W Rigid Solar Panel goes from 20.3 V on its label to about 22.4 V at 20°F and 23.2 V at 0°F. The Pioneer MD (AC180T) accepts up to 60 V on the Solar input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Pioneer MD (AC180T)
- BLUETTI Pioneer MD (AC180T): solar input 12 to 60 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.33% per °C below 77F (25°C), this panel's own figure. At 20F one panel's 20.3 V becomes 22.4 V.
- The current limit for this input is not confirmed yet.
- Max 500 W on this input.
- Cold-morning voltage uses this panel's own coefficient from its manual, 0.33% per °C.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.