We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the Anker SOLIX S2000?

Yes. One EcoFlow NextGen 220W Bifacial Portable Solar Panel works with the Anker SOLIX S2000: about 23.5 V on a 20°F morning against the station's 60 V limit, and about 219 W in full sun. Two panels: works (2 panels in series on XT60i), about 400 W.

Verdict

Works

1 x NextGen 220W Bifacial Portable Solar Panel into the S2000 (1 panel on XT60i) stays inside 11 to 60 V and under 12.5 A, even at 20F.

1 x NextGen 220W Bifacial Portable Solar Panel1 panel on XT60i
S2000XT60i
Expected
219W
Voltage at 20F
23.5V
limit 60 V
Current
11.9A
cap 12.5 A
  • The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Cables to buy
  • Use an MC4 to XT60i solar cable.
EcoFlow NextGen 220W Bifacial Portable Solar Panel

220 W, open-circuit 21.5 V, short-circuit 12.4 A, working 18.4 V / 11.9 A. Brand page Panel details

Anker SOLIX S2000

Solar input XT60i: 11 to 60 V, 400 W max. Manual Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in series on XT60i
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
XT60i47.111.9400Works
2 panels in parallel on XT60i
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
XT60i23.523.8230Works

Quick answers

Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the Anker SOLIX S2000?

Yes. One EcoFlow NextGen 220W Bifacial Portable Solar Panel works with the Anker SOLIX S2000: about 23.5 V on a 20°F morning against the station's 60 V limit, and about 219 W in full sun. Two panels: works (2 panels in series on XT60i), about 400 W.

Can I connect two NextGen 220W Bifacial Portable Solar Panel panels to the S2000?

Yes, 2 panels in series on XT60i. That gives about 400 W.

What cable do I need to connect the NextGen 220W Bifacial Portable Solar Panel to the S2000?

Use an MC4 to XT60i solar cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One NextGen 220W Bifacial Portable Solar Panel goes from 21.5 V on its label to about 23.5 V at 20°F and 24.3 V at 0°F. The S2000 accepts up to 60 V on the XT60i.

Where to buy

$1,000 at the Anker SOLIX store, Oct 28, 2026
BuyAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the S2000

→Jackery SolarSaga 200 (JS-200E), about 400 W with two
→Jackery SolarSaga 200 (JS-200D), about 400 W with two
→EcoFlow 400W Portable Solar Panel, about 400 W with two
→BLUETTI SP200L Solar Panel, about 400 W with two
→Renogy E.Flex 200W Portable Solar Panel, about 400 W with two

All 33 panels checked against the S2000

Rules we applied
  • Anker SOLIX S2000: solar input 11 to 60 V on the Solar in (XT60i). Anker SOLIX does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.5 V becomes 23.5 V.
  • Current over the 12.5 A cap is safe: the station takes 12.5 A and you get fewer watts. We count only the capped watts.
  • Max 400 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
Checked Oct 28, 2026