We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the Anker SOLIX F3000?

Yes. One EcoFlow NextGen 220W Bifacial Portable Solar Panel works with the Anker SOLIX F3000: about 23.5 V on a 20°F morning against the station's 165 V limit, and about 219 W in full sun. Two panels: works (1 panel on High-PV + 1 panel on Low-PV), about 438 W.

Verdict

Works

1 x NextGen 220W Bifacial Portable Solar Panel into the F3000 (1 panel on High-PV) stays inside 11 to 165 V and under 17 A, even at 20F.

1 x NextGen 220W Bifacial Portable Solar Panel1 panel on High-PV
F3000High-PV
Expected
219W
Voltage at 20F
23.5V
limit 165 V
Current
11.9A
cap 17 A
  • The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
  • Anker does not say whether its voltage limit is open-circuit or working voltage, so the checker uses the stricter reading.
  • The two solar inputs are different: High-PV takes 11 to 165V, Low-PV takes 11 to 60V.
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
EcoFlow NextGen 220W Bifacial Portable Solar Panel

220 W, open-circuit 21.5 V, short-circuit 12.4 A, working 18.4 V / 11.9 A. Brand page Panel details

Anker SOLIX F3000

Solar input High-PV: 11 to 165 V; Low-PV: 11 to 60 V, 2400 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
1 panel on High-PV + 1 panel on Low-PV
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
High-PV + Low-PV23.511.9438Works
2 panels in series on High-PV
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
High-PV47.111.9438Works
2 panels in series on Low-PV
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Low-PV47.111.9438Works
2 panels in parallel on High-PV
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
High-PV23.523.8313Works
2 panels in parallel on Low-PV
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
Low-PV23.523.8313Works

Quick answers

Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the Anker SOLIX F3000?

Yes. One EcoFlow NextGen 220W Bifacial Portable Solar Panel works with the Anker SOLIX F3000: about 23.5 V on a 20°F morning against the station's 165 V limit, and about 219 W in full sun. Two panels: works (1 panel on High-PV + 1 panel on Low-PV), about 438 W.

Can I connect two NextGen 220W Bifacial Portable Solar Panel panels to the F3000?

Yes, 1 panel on High-PV + 1 panel on Low-PV. That gives about 438 W.

What cable do I need to connect the NextGen 220W Bifacial Portable Solar Panel to the F3000?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One NextGen 220W Bifacial Portable Solar Panel goes from 21.5 V on its label to about 23.5 V at 20°F and 24.3 V at 0°F. The F3000 accepts up to 165 V on the High-PV.

Where to buy

$1,900 at the Anker SOLIX store, Oct 28, 2026
Buy

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the F3000

→EcoFlow 400W Portable Solar Panel, about 800 W with two
→Anker SOLIX PS400 Bifacial, about 800 W with two
→BLUETTI PV350D, about 700 W with two
→Renogy 250W N-Type Bifacial Solar Panel, about 500 W with two
→Jackery SolarSaga 200 (JS-200E), about 400 W with two

All 33 panels checked against the F3000

Rules we applied
  • Anker SOLIX F3000: solar input 11 to 165 V on the Solar in 1 (High-PV). Anker SOLIX does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.5 V becomes 23.5 V.
  • Current over the 17 A cap is safe: the station takes 17 A and you get fewer watts. We count only the capped watts.
  • Max 1,600 W on this input, 2,400 W across all inputs.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pageF3000 spec page, solar input
Checked Oct 28, 2026