Will the EcoFlow 100W Flexible Solar Panel work with the Anker SOLIX F3000?
Yes. One EcoFlow 100W Flexible Solar Panel works with the Anker SOLIX F3000: about 22.4 V on a 20°F morning against the station's 165 V limit, and about 100 W in full sun. Two panels: works (1 panel on High-PV + 1 panel on Low-PV), about 200 W.
Works
1 x 100W Flexible Solar Panel into the F3000 (1 panel on High-PV) stays inside 11 to 165 V and under 17 A, even at 20F.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- Anker does not say whether its voltage limit is open-circuit or working voltage, so the checker uses the stricter reading.
- The two solar inputs are different: High-PV takes 11 to 165V, Low-PV takes 11 to 60V.
- Use the solar charging cable that came with the station (MC4 on the panel side).
100 W, open-circuit 20.3 V, short-circuit 6.3 A, working 17.1 V / 5.9 A. Brand page Panel details
Anker SOLIX F3000Solar input High-PV: 11 to 165 V; Low-PV: 11 to 60 V, 2400 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on High-PV + 1 panel on Low-PV The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High-PV + Low-PV | 22.4 | 5.9 | 200 | Works |
| 2 panels in parallel on High-PV The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High-PV | 22.4 | 11.8 | 200 | Works |
| 2 panels in series on High-PV The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High-PV | 44.8 | 5.9 | 200 | Works |
| 2 panels in parallel on Low-PV The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | Low-PV | 22.4 | 11.8 | 200 | Works |
| 2 panels in series on Low-PV The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | Low-PV | 44.8 | 5.9 | 200 | Works |
Quick answers
Will the EcoFlow 100W Flexible Solar Panel work with the Anker SOLIX F3000?
Yes. One EcoFlow 100W Flexible Solar Panel works with the Anker SOLIX F3000: about 22.4 V on a 20°F morning against the station's 165 V limit, and about 100 W in full sun. Two panels: works (1 panel on High-PV + 1 panel on Low-PV), about 200 W.
Can I connect two 100W Flexible Solar Panel panels to the F3000?
Yes, 1 panel on High-PV + 1 panel on Low-PV. That gives about 200 W.
What cable do I need to connect the 100W Flexible Solar Panel to the F3000?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One 100W Flexible Solar Panel goes from 20.3 V on its label to about 22.4 V at 20°F and 23.2 V at 0°F. The F3000 accepts up to 165 V on the High-PV.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the F3000
- Anker SOLIX F3000: solar input 11 to 165 V on the Solar in 1 (High-PV). Anker SOLIX does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.33% per °C below 77F (25°C), this panel's own figure. At 20F one panel's 20.3 V becomes 22.4 V.
- Current over the 17 A cap is safe: the station takes 17 A and you get fewer watts. We count only the capped watts.
- Max 1,600 W on this input, 2,400 W across all inputs.
- Cold-morning voltage uses this panel's own coefficient from its manual, 0.33% per °C.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.