We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Anker SOLIX PS200 Bifacial work with the Anker SOLIX F3000?

Yes. One Anker SOLIX PS200 Bifacial works with the Anker SOLIX F3000: about 63.1 V on a 20°F morning against the station's 165 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on High-PV), about 399 W.

Verdict

Works

1 x PS200 Bifacial into the F3000 (1 panel on High-PV) stays inside 11 to 165 V and under 17 A, even at 20F.

1 x PS200 Bifacial1 panel on High-PV
F3000High-PV
Expected
200W
Voltage at 20F
63.1V
limit 165 V
Current
4.2A
cap 17 A
  • The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
  • Anker does not say whether its voltage limit is open-circuit or working voltage, so the checker uses the stricter reading.
  • The two solar inputs are different: High-PV takes 11 to 165V, Low-PV takes 11 to 60V.
Cables to buy
  • The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.
Anker SOLIX PS200 Bifacial

200 W, open-circuit 57.6 V, short-circuit 4.4 A, working 48 V / 4.2 A. Unconfirmed Panel details

Anker SOLIX F3000

Solar input High-PV: 11 to 165 V; Low-PV: 11 to 60 V, 2400 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on High-PV
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
High-PV63.18.3399Works
2 panels in series on High-PV
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
High-PV126.14.2399Works
1 panel on High-PV + 1 panel on Low-PV
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
High-PV + Low-PV63.14.2400Works, with a catch
2 panels in parallel on Low-PV
Fine in mild weather (57.6V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 63.1V, above the 60V limit. Cold makes panels push more voltage.
Low-PV63.18.3399Works, with a catch
2 panels in series on Low-PV
Open-circuit voltage 115.2V is above the station's 60V limit. Going over a station's input voltage limit can damage it.
Low-PV126.14.20Don't connect

Quick answers

Will the Anker SOLIX PS200 Bifacial work with the Anker SOLIX F3000?

Yes. One Anker SOLIX PS200 Bifacial works with the Anker SOLIX F3000: about 63.1 V on a 20°F morning against the station's 165 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on High-PV), about 399 W.

Can I connect two PS200 Bifacial panels to the F3000?

Yes, 2 panels in parallel on High-PV. That gives about 399 W.

What cable do I need to connect the PS200 Bifacial to the F3000?

The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One PS200 Bifacial goes from 57.6 V on its label to about 63.1 V at 20°F and 65 V at 0°F. The F3000 accepts up to 165 V on the High-PV.

Where to buy

$500 at the Anker SOLIX store, Oct 28, 2026
BuyAmazon
$1,900 at the Anker SOLIX store, Oct 28, 2026
Buy

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the F3000

→EcoFlow 400W Portable Solar Panel, about 800 W with two
→Anker SOLIX PS400 Bifacial, about 800 W with two
→BLUETTI PV350D, about 700 W with two
→Renogy 250W N-Type Bifacial Solar Panel, about 500 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 438 W with two

All 33 panels checked against the F3000

Rules we applied
  • Anker SOLIX F3000: solar input 11 to 165 V on the Solar in 1 (High-PV). Anker SOLIX does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 57.6 V becomes 63.1 V.
  • Current over the 17 A cap is safe: the station takes 17 A and you get fewer watts. We count only the capped watts.
  • Max 1,600 W on this input, 2,400 W across all inputs.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
  • Some numbers for Anker SOLIX PS200 Bifacial come from a shop listing we have not confirmed in the manual yet.
Sources
From the brand's pageF3000 spec page, solar input
Shop listing, not yet confirmedPS200 Bifacial label values
Checked Oct 28, 2026