Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the Anker SOLIX F1500?
Yes. One EcoFlow NextGen 220W Bifacial Portable Solar Panel works with the Anker SOLIX F1500: about 23.5 V on a 20°F morning against the station's 30 V limit, and about 219 W in full sun. Two panels: works (2 panels in parallel on XT60), about 230 W.
Works
1 x NextGen 220W Bifacial Portable Solar Panel into the F1500 (1 panel on XT60) stays inside 11 to 30 V and under 12.5 A, even at 20F.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- Anker does not say whether its voltage limit is open-circuit or working voltage, so the checker uses the stricter reading.
- Anker's own page gives two different solar limits for this model (up to 30V and up to 60V). Until that is settled, the checker uses 30V.
- Use an MC4 to XT60 solar cable.
220 W, open-circuit 21.5 V, short-circuit 12.4 A, working 18.4 V / 11.9 A. Brand page Panel details
Anker SOLIX F1500Solar input XT60: 11 to 30 V, 600 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on XT60 The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | XT60 | 23.5 | 23.8 | 230 | Works |
| 2 panels in series on XT60 Open-circuit voltage 43V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | XT60 | 47.1 | 11.9 | 0 | Don't connect |
Quick answers
Will the EcoFlow NextGen 220W Bifacial Portable Solar Panel work with the Anker SOLIX F1500?
Yes. One EcoFlow NextGen 220W Bifacial Portable Solar Panel works with the Anker SOLIX F1500: about 23.5 V on a 20°F morning against the station's 30 V limit, and about 219 W in full sun. Two panels: works (2 panels in parallel on XT60), about 230 W.
Can I connect two NextGen 220W Bifacial Portable Solar Panel panels to the F1500?
Yes, 2 panels in parallel on XT60. That gives about 230 W.
What cable do I need to connect the NextGen 220W Bifacial Portable Solar Panel to the F1500?
Use an MC4 to XT60 solar cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One NextGen 220W Bifacial Portable Solar Panel goes from 21.5 V on its label to about 23.5 V at 20°F and 24.3 V at 0°F. The F1500 accepts up to 30 V on the XT60.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the F1500
- Anker SOLIX F1500: solar input 11 to 30 V on the Solar in (XT60). Anker SOLIX does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.5 V becomes 23.5 V.
- Current over the 12.5 A cap is safe: the station takes 12.5 A and you get fewer watts. We count only the capped watts.
- Max 600 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.