Will the Renogy E.Flex 200W Portable Solar Panel work with the Jackery HomePower 3600 Plus?
Yes. One Renogy E.Flex 200W Portable Solar Panel works with the Jackery HomePower 3600 Plus: about 25.6 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 400 W.
Works
1 x E.Flex 200W Portable Solar Panel into the HomePower 3600 Plus (1 panel on DC8020) stays inside 12 to 60 V and under 12 A, even at 20F.
- Jackery's manual: if you use both inputs, keep the voltage on both the same (same panel model, same number of panels), or the unit can be damaged.
- Needs an MC4 to DC8020 adapter cable.
200 W, open-circuit 23.4 V, short-circuit 10.5 A, working 20.2 V / 9.9 A. Brand page Panel details
Jackery HomePower 3600 PlusSolar input DC8020: 12 to 60 V; DC8020: 12 to 60 V, 1000 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on DC8020 + 1 panel on DC8020 Best option | DC8020 + DC8020 | 25.6 | 9.9 | 400 | Works |
| 2 panels in series on DC8020 | DC8020 | 51.2 | 9.9 | 400 | Works |
| 2 panels in parallel on DC8020 The panels can push 19.8A but this input takes 12A, so the station caps it. Safe, you just lose some watts. | DC8020 | 25.6 | 19.8 | 242 | Works |
Quick answers
Will the Renogy E.Flex 200W Portable Solar Panel work with the Jackery HomePower 3600 Plus?
Yes. One Renogy E.Flex 200W Portable Solar Panel works with the Jackery HomePower 3600 Plus: about 25.6 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 400 W.
Can I connect two E.Flex 200W Portable Solar Panel panels to the HomePower 3600 Plus?
Yes, 1 panel on DC8020 + 1 panel on DC8020. That gives about 400 W.
What cable do I need to connect the E.Flex 200W Portable Solar Panel to the HomePower 3600 Plus?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One E.Flex 200W Portable Solar Panel goes from 23.4 V on its label to about 25.6 V at 20°F and 26.4 V at 0°F. The HomePower 3600 Plus accepts up to 60 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the HomePower 3600 Plus
- Jackery HomePower 3600 Plus: solar input 12 to 60 V on the Solar in 1 (DC8020). Jackery sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 23.4 V becomes 25.6 V.
- Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
- Max 500 W on this input, 1,000 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.