We may earn a commission if you buy through these links. It never changes a verdict. How this works

Will the EcoFlow 175W Rigid Solar Panel work with the Jackery HomePower 3000?

Yes. One EcoFlow 175W Rigid Solar Panel works with the Jackery HomePower 3000: about 27.9 V on a 20°F morning against the station's 60 V limit, and about 175 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 350 W.

Verdict

Works

1 x 175W Rigid Solar Panel into the HomePower 3000 (1 panel on DC8020) stays inside 12 to 60 V and under 12 A, even at 20F.

1 x 175W Rigid Solar Panel1 panel on DC8020
HomePower 3000DC8020
Expected
175W
Voltage at 20F
27.9V
limit 60 V
Current
7.9A
cap 12 A
  • Jackery's manual: if you use both inputs, use the same Jackery panel model and the same number of panels on each, or the unit can be damaged.
  • EcoFlow's spec table labels the 7.85 A figure as a voltage; it is the operating current.
Cables to buy
  • Needs an MC4 to DC8020 adapter cable.
EcoFlow 175W Rigid Solar Panel

175 W, open-circuit 25.5 V, short-circuit 8.3 A, working 22.3 V / 7.9 A. Brand page Panel details

Jackery HomePower 3000

Solar input DC8020: 12 to 60 V; DC8020: 12 to 60 V, 1000 W max. Manual Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
1 panel on DC8020 + 1 panel on DC8020
Best option
DC8020 + DC802027.97.9350Works
2 panels in series on DC8020
DC802055.87.9350Works
2 panels in parallel on DC8020
The panels can push 15.7A but this input takes 12A, so the station caps it. Safe, you just lose some watts.
DC802027.915.7268Works

Quick answers

Will the EcoFlow 175W Rigid Solar Panel work with the Jackery HomePower 3000?

Yes. One EcoFlow 175W Rigid Solar Panel works with the Jackery HomePower 3000: about 27.9 V on a 20°F morning against the station's 60 V limit, and about 175 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 350 W.

Can I connect two 175W Rigid Solar Panel panels to the HomePower 3000?

Yes, 1 panel on DC8020 + 1 panel on DC8020. That gives about 350 W.

What cable do I need to connect the 175W Rigid Solar Panel to the HomePower 3000?

Needs an MC4 to DC8020 adapter cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One 175W Rigid Solar Panel goes from 25.5 V on its label to about 27.9 V at 20°F and 28.8 V at 0°F. The HomePower 3000 accepts up to 60 V on the DC8020.

Where to buy

$249 at the EcoFlow store, Oct 28, 2026
BuyAmazon
$1,499 at the Jackery store, Oct 28, 2026
Buy

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the HomePower 3000

→EcoFlow 400W Portable Solar Panel, about 800 W with two
→Renogy 250W N-Type Bifacial Solar Panel, about 468 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 438 W with two
→Jackery SolarSaga 200 (JS-200E), about 400 W with two
→Jackery SolarSaga 200 (JS-200D), about 400 W with two

All 33 panels checked against the HomePower 3000

Rules we applied
  • Jackery HomePower 3000: solar input 12 to 60 V on the Solar in 1 (DC8020). Jackery rates this input by working voltage (Vmp), so that is the number we hold to the limit. We still warn when the cold-morning open-circuit voltage goes over it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 25.5 V becomes 27.9 V.
  • Current over the 12 A cap is safe: the station takes 12 A and you get fewer watts. We count only the capped watts.
  • Max 500 W on this input, 1,000 W across all inputs.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
Checked Oct 28, 2026