Will the Rich Solar MEGA 200 work with the Jackery Explorer 600 v2?
Yes. One Rich Solar MEGA 200 works with the Jackery Explorer 600 v2: about 23.9 V on a 20°F morning against the station's 60 V limit, and about 193 W in full sun. Two panels: works (2 panels in series on DC8020), about 200 W.
Works
1 x MEGA 200 into the Explorer 600 v2 (1 panel on DC8020) stays inside 16 to 60 V, even at 20F. The station caps the current at 10.5 A.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- The panels can push 10.9A but this input takes 10.5A, so the station caps it. Safe, you just lose some watts.
- Needs an MC4 to DC8020 adapter cable.
200 W, open-circuit 21.8 V, short-circuit 11.6 A, working 18.4 V / 10.9 A. Brand page Panel details
Jackery Explorer 600 v2Solar input DC8020: 16 to 60 V, 200 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in series on DC8020 The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | DC8020 | 47.7 | 10.9 | 200 | Works |
| 2 panels in parallel on DC8020 The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | DC8020 | 23.9 | 21.8 | 193 | Works |
Quick answers
Will the Rich Solar MEGA 200 work with the Jackery Explorer 600 v2?
Yes. One Rich Solar MEGA 200 works with the Jackery Explorer 600 v2: about 23.9 V on a 20°F morning against the station's 60 V limit, and about 193 W in full sun. Two panels: works (2 panels in series on DC8020), about 200 W.
Can I connect two MEGA 200 panels to the Explorer 600 v2?
Yes, 2 panels in series on DC8020. That gives about 200 W.
What cable do I need to connect the MEGA 200 to the Explorer 600 v2?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One MEGA 200 goes from 21.8 V on its label to about 23.9 V at 20°F and 24.6 V at 0°F. The Explorer 600 v2 accepts up to 60 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Explorer 600 v2
- Jackery Explorer 600 v2: solar input 16 to 60 V on the Solar in (DC8020). Jackery does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.8 V becomes 23.9 V.
- Current over the 10.5 A cap is safe: the station takes 10.5 A and you get fewer watts. We count only the capped watts.
- Max 200 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.