Will the Rich Solar MEGA 200 PRO (24V) work with the Jackery Explorer 600 v2?
Yes. One Rich Solar MEGA 200 PRO (24V) works with the Jackery Explorer 600 v2: about 47.6 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on DC8020), about 200 W.
Works
1 x MEGA 200 PRO (24V) into the Explorer 600 v2 (1 panel on DC8020) stays inside 16 to 60 V and under 10.5 A, even at 20F.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- A 24 V panel: 43.5 V open circuit on its own, so two in series (87 V) only suit high-voltage solar inputs.
- Needs an MC4 to DC8020 adapter cable.
200 W, open-circuit 43.5 V, short-circuit 5.9 A, working 36.3 V / 5.5 A. Brand page Panel details
Jackery Explorer 600 v2Solar input DC8020: 16 to 60 V, 200 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on DC8020 The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | DC8020 | 47.6 | 11 | 200 | Works |
| 2 panels in series on DC8020 Open-circuit voltage 87V is above the station's 60V limit. Going over a station's input voltage limit can damage it. | DC8020 | 95.3 | 5.5 | 0 | Don't connect |
Quick answers
Will the Rich Solar MEGA 200 PRO (24V) work with the Jackery Explorer 600 v2?
Yes. One Rich Solar MEGA 200 PRO (24V) works with the Jackery Explorer 600 v2: about 47.6 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on DC8020), about 200 W.
Can I connect two MEGA 200 PRO (24V) panels to the Explorer 600 v2?
Yes, 2 panels in parallel on DC8020. That gives about 200 W.
What cable do I need to connect the MEGA 200 PRO (24V) to the Explorer 600 v2?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One MEGA 200 PRO (24V) goes from 43.5 V on its label to about 47.6 V at 20°F and 49.1 V at 0°F. The Explorer 600 v2 accepts up to 60 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Explorer 600 v2
- Jackery Explorer 600 v2: solar input 16 to 60 V on the Solar in (DC8020). Jackery does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 43.5 V becomes 47.6 V.
- Current over the 10.5 A cap is safe: the station takes 10.5 A and you get fewer watts. We count only the capped watts.
- Max 200 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.