Will the EcoFlow 110W Portable Solar Panel work with the Jackery Explorer 5000 Plus?
Yes. One EcoFlow 110W Portable Solar Panel works with the Jackery Explorer 5000 Plus: about 23.9 V on a 20°F morning against the station's 60 V limit, and about 110 W in full sun. Two panels: works (2 panels in series on Low-PV (DC8020)), about 220 W.
Works
1 x 110W Portable Solar Panel into the Explorer 5000 Plus (1 panel on Low-PV (DC8020)) stays inside 11 to 60 V and under 10.5 A, even at 20F.
- There are two kinds of solar input: High-PV takes 135 to 450V (panels in series), Low-PV is two DC8020 ports.
- Needs an MC4 to DC8020 adapter cable.
110 W, open-circuit 21.8 V, short-circuit 6.5 A, working 18.4 V / 6 A. Brand page Panel details
Jackery Explorer 5000 PlusSolar input High-PV (MC4): 135 to 450 V; Low-PV (DC8020): 11 to 60 V; Low-PV (DC8020): 11 to 60 V. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in series on Low-PV (DC8020) Best option | Low-PV (DC8020) | 47.7 | 6 | 220 | Works |
| 2 panels in parallel on Low-PV (DC8020) The panels can push 12A but this input takes 10.5A, so the station caps it. Safe, you just lose some watts. | Low-PV (DC8020) | 23.9 | 12 | 193 | Works |
| 1 panel on High-PV (MC4) + 1 panel on Low-PV (DC8020) Open-circuit voltage 21.8V is below the 135V minimum for this input, so it will not start charging. | High-PV (MC4) + Low-PV (DC8020) | 23.9 | 6 | 0 | Don't connect |
| 2 panels in parallel on High-PV (MC4) Open-circuit voltage 21.8V is below the 135V minimum for this input, so it will not start charging. | High-PV (MC4) | 23.9 | 12 | 0 | Don't connect |
| 2 panels in series on High-PV (MC4) Open-circuit voltage 43.6V is below the 135V minimum for this input, so it will not start charging. | High-PV (MC4) | 47.7 | 6 | 0 | Don't connect |
Quick answers
Will the EcoFlow 110W Portable Solar Panel work with the Jackery Explorer 5000 Plus?
Yes. One EcoFlow 110W Portable Solar Panel works with the Jackery Explorer 5000 Plus: about 23.9 V on a 20°F morning against the station's 60 V limit, and about 110 W in full sun. Two panels: works (2 panels in series on Low-PV (DC8020)), about 220 W.
Can I connect two 110W Portable Solar Panel panels to the Explorer 5000 Plus?
Yes, 2 panels in series on Low-PV (DC8020). That gives about 220 W.
What cable do I need to connect the 110W Portable Solar Panel to the Explorer 5000 Plus?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One 110W Portable Solar Panel goes from 21.8 V on its label to about 23.9 V at 20°F and 24.6 V at 0°F. The Explorer 5000 Plus accepts up to 60 V on the Low-PV (DC8020).
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Explorer 5000 Plus
- Jackery Explorer 5000 Plus: solar input 11 to 60 V on the Solar in 2 (Low-PV (DC8020)). Jackery rates this input by working voltage (Vmp), so that is the number we hold to the limit. We still warn when the cold-morning open-circuit voltage goes over it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.8 V becomes 23.9 V.
- Current over the 10.5 A cap is safe: the station takes 10.5 A and you get fewer watts. We count only the capped watts.
- Max watts on this input: not confirmed yet.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.