Will the Jackery SolarSaga 100 Air work with the Jackery Explorer 240 v2?
No. Open-circuit voltage 29.7V is above the station's 27V limit. Going over a station's input voltage limit can damage it. Two panels: don't connect (2 panels in parallel on USB-C (with DC8020-to-USB-C adapter)), about 0 W.
Don't connect
Do not plug this in. Open-circuit voltage 29.7V is above the station's 27V limit. Going over a station's input voltage limit can damage it.
- Open-circuit voltage 29.7V is above the station's 27V limit. Going over a station's input voltage limit can damage it.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- Solar charging goes in through the USB-C port and needs a DC8020-to-USB-C adapter (sold separately).
- Bifacial: Jackery also rates it at 110 W with light on the back (BNPI); the checker uses the front-only figures.
100 W, open-circuit 29.7 V, short-circuit 4.1 A, working 25.4 V / 4 A. Brand page Panel details
Jackery Explorer 240 v2Solar input USB-C (with DC8020-to-USB-C adapter): 12 to 27 V, 100 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on USB-C (with DC8020-to-USB-C adapter) Open-circuit voltage 29.7V is above the station's 27V limit. Going over a station's input voltage limit can damage it. | USB-C (with DC8020-to-USB-C adapter) | 32.5 | 7.9 | 0 | Don't connect |
| 2 panels in series on USB-C (with DC8020-to-USB-C adapter) Open-circuit voltage 59.4V is above the station's 27V limit. Going over a station's input voltage limit can damage it. | USB-C (with DC8020-to-USB-C adapter) | 65 | 4 | 0 | Don't connect |
Quick answers
Will the Jackery SolarSaga 100 Air work with the Jackery Explorer 240 v2?
No. Open-circuit voltage 29.7V is above the station's 27V limit. Going over a station's input voltage limit can damage it. Two panels: don't connect (2 panels in parallel on USB-C (with DC8020-to-USB-C adapter)), about 0 W.
Can I connect two SolarSaga 100 Air panels to the Explorer 240 v2?
No: Open-circuit voltage 29.7V is above the station's 27V limit. Going over a station's input voltage limit can damage it.
Is it safe on a cold morning?
Panel voltage rises in the cold. One SolarSaga 100 Air goes from 29.7 V on its label to about 32.5 V at 20°F and 33.5 V at 0°F. The Explorer 240 v2 accepts up to 27 V on the USB-C (with DC8020-to-USB-C adapter).
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Explorer 240 v2
- Jackery Explorer 240 v2: solar input 12 to 27 V on the Solar in (USB-C (with DC8020-to-USB-C adapter)). Jackery does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 29.7 V becomes 32.5 V.
- Current over the 5 A cap is safe: the station takes 5 A and you get fewer watts. We count only the capped watts.
- Max 100 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.