Will the Rich Solar MEGA 200 PRO (24V) work with the Jackery Explorer 1000 Plus?
Yes. One Rich Solar MEGA 200 PRO (24V) works with the Jackery Explorer 1000 Plus: about 47.6 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 400 W.
Works
1 x MEGA 200 PRO (24V) into the Explorer 1000 Plus (1 panel on DC8020) stays inside 12 to 60 V and under 11 A, even at 20F.
- Jackery's manual: if you use both inputs, put the same type and number of panels on each.
- A 24 V panel: 43.5 V open circuit on its own, so two in series (87 V) only suit high-voltage solar inputs.
- Needs an MC4 to DC8020 adapter cable.
200 W, open-circuit 43.5 V, short-circuit 5.9 A, working 36.3 V / 5.5 A. Brand page Panel details
Jackery Explorer 1000 PlusSolar input DC8020: 12 to 60 V; DC8020: 12 to 60 V, 800 W max. Manual Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on DC8020 + 1 panel on DC8020 Best option | DC8020 + DC8020 | 47.6 | 5.5 | 400 | Works |
| 2 panels in parallel on DC8020 The panels can push 11A but this input takes 11A, so the station caps it. Safe, you just lose some watts. | DC8020 | 47.6 | 11 | 399 | Works |
| 2 panels in series on DC8020 Working voltage 72.6V is above the station's 60V limit. | DC8020 | 95.3 | 5.5 | 0 | Don't connect |
Quick answers
Will the Rich Solar MEGA 200 PRO (24V) work with the Jackery Explorer 1000 Plus?
Yes. One Rich Solar MEGA 200 PRO (24V) works with the Jackery Explorer 1000 Plus: about 47.6 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (1 panel on DC8020 + 1 panel on DC8020), about 400 W.
Can I connect two MEGA 200 PRO (24V) panels to the Explorer 1000 Plus?
Yes, 1 panel on DC8020 + 1 panel on DC8020. That gives about 400 W.
What cable do I need to connect the MEGA 200 PRO (24V) to the Explorer 1000 Plus?
Needs an MC4 to DC8020 adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One MEGA 200 PRO (24V) goes from 43.5 V on its label to about 47.6 V at 20°F and 49.1 V at 0°F. The Explorer 1000 Plus accepts up to 60 V on the DC8020.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Explorer 1000 Plus
- Jackery Explorer 1000 Plus: solar input 12 to 60 V on the Solar in 1 (DC8020). Jackery rates this input by working voltage (Vmp), so that is the number we hold to the limit. We still warn when the cold-morning open-circuit voltage goes over it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 43.5 V becomes 47.6 V.
- Current over the 11 A cap is safe: the station takes 11 A and you get fewer watts. We count only the capped watts.
- Max 400 W on this input, 800 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.