We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Rich Solar MEGA 200 work with the Goal Zero Yeti 700?

Yes. One Rich Solar MEGA 200 works with the Goal Zero Yeti 700: about 23.9 V on a 20°F morning against the station's 28 V limit, and about 184 W in full sun. Two panels: works (2 panels in parallel on 8mm), about 184 W.

Verdict

Works

1 x MEGA 200 into the Yeti 700 (1 panel on 8mm) stays inside 12.3 to 28 V, even at 20F. The station caps the current at 10 A.

1 x MEGA 2001 panel on 8mm
Yeti 7008mm
Expected
184W
Voltage at 20F
23.9V
limit 28 V
Current
10.9A
cap 10 A
  • The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
  • The panels can push 10.9A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
  • Goal Zero says a 200 W panel needs its HPP to 8mm connector for this station.
Cables to buy
  • Needs an MC4 to 8mm adapter cable.
Rich Solar MEGA 200

200 W, open-circuit 21.8 V, short-circuit 11.6 A, working 18.4 V / 10.9 A. Brand page Panel details

Goal Zero Yeti 700

Solar input 8mm: 12.3 to 28 V, 200 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on 8mm
The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
8mm23.921.8184Works
2 panels in series on 8mm
Open-circuit voltage 43.6V is above the station's 28V limit. Going over a station's input voltage limit can damage it.
8mm47.710.90Don't connect

Quick answers

Will the Rich Solar MEGA 200 work with the Goal Zero Yeti 700?

Yes. One Rich Solar MEGA 200 works with the Goal Zero Yeti 700: about 23.9 V on a 20°F morning against the station's 28 V limit, and about 184 W in full sun. Two panels: works (2 panels in parallel on 8mm), about 184 W.

Can I connect two MEGA 200 panels to the Yeti 700?

Yes, 2 panels in parallel on 8mm. That gives about 184 W.

What cable do I need to connect the MEGA 200 to the Yeti 700?

Needs an MC4 to 8mm adapter cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One MEGA 200 goes from 21.8 V on its label to about 23.9 V at 20°F and 24.6 V at 0°F. The Yeti 700 accepts up to 28 V on the 8mm.

Where to buy

$240 at the Rich Solar store, Oct 28, 2026
BuyAmazon
$700 at the Goal Zero store, Oct 28, 2026
Buy

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the Yeti 700

→Jackery SolarSaga 200 (JS-200D), about 200 W with two
→BLUETTI PV200D, about 200 W with two
→EcoFlow 175W Rigid Solar Panel, about 200 W with two
→BLUETTI SP100L Solar Panel, about 200 W with two
→BLUETTI SP200L Solar Panel, about 200 W with two

All 33 panels checked against the Yeti 700

Rules we applied
  • Goal Zero Yeti 700: solar input 12.3 to 28 V on the Solar in (8mm). Goal Zero does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.8 V becomes 23.9 V.
  • Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
  • Max 200 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pageYeti 700 spec page, solar input
From the brand's pageMEGA 200 label values
Checked Oct 28, 2026